3 kW electric pool heater with titanium heat exchanger
3 kW electric pool heater with titanium heat exchanger subject to supplier availability.
Available to order: delivery time to be confirmed
Description
Description
Ideal for
- Pools that require a direct electric heating system.
- Installations with a power supply compatible with 230 V.
- Systems where the water temperature needs to be regulated up to 40 °C.
- Installations compatible with 25, 32, 40, 50 or 63 mm connections.
This 3 kW electric pool heater is installed directly in the hydraulic circuit to transfer heat to the water as it flows through the unit.
It features an adjustable thermostat up to 40 °C, allowing you to select the desired operating temperature.
Technical specifications
- Power consumption: 3.0 kW
- Power supply: 230 V
- Thermostat: adjustable up to 40 °C
- Maximum pressure: 2 bar
- Stainless steel: AISI 316L
- Heat exchanger: titanium
- Connections: 63 / 50 / 40 / 32 / 25 mm
- Installation: filtration circuit
How the electric heater works
Direct water heating
The heater is installed in the the pool filtration circuit. During operation, water passes through the unit and receives directly the thermal energy generated by the heater.
With a power output of 3 kW, heating is gradual. The time required to reach the desired temperature desired temperature will depend on the water volume and thermal losses of each installation.
Temperature control up to 40 °C
The adjustable thermostat allows you to set the operating temperature up to a maximum of 40 °C.
A thermal cover can be especially useful during climate control, as it limits heat loss from the surface and reduces the energy required to maintain the temperature.
Construction and installation
Materials
- Stainless steel: AISI 316L
- Heat exchanger: titanium
- Internal pipes: stainless steel
The combination of 316L stainless steel and titanium provides the equipment with suitable materials for working in contact with the water inside the pool's hydraulic circuit.
Connection to the circuit
- Connections: 63 / 50 / 40 / 32 / 25 mm
- Maximum pressure: 2 bar
- Power supply: 230 V
- Location: filtration circuit
Before installation, both the hydraulic compatibility and the capacity of the electrical installation to correctly power a 3 kW load.
Technical data for the 3 kW heater
| Feature | Value |
|---|---|
| Power / consumption | 3.0 kW |
| Electrical supply | 230 V |
| Maximum thermostat temperature | 40 °C |
| Maximum pressure | 2 bar |
| Stainless steel | AISI 316L |
| Heat exchanger | Titanium |
| Connections | 63 / 50 / 40 / 32 / 25 mm |
Frequently asked questions
What pool size is a 3 kW electric heater suitable for?
There is no single volume applicable to all installations. The previous commercial text associated it with pools of up to 30,000 liters, but actual performance depends on heat losses heat losses, the initial temperature, the target temperature, and the time available to heat the water.
How long does it take to heat a pool?
It mainly depends on the water volume, the temperature difference, the desired temperature and heat losses. A 3 kW heater provides heat progressively, so a universal heating time cannot be established.
Where is the heater installed?
It is installed in the pool's filtration circuit, following the hydraulic diagram, flow rate, and instructions specified by the manufacturer.
What temperature can it be adjusted to?
According to the available information, it features an adjustable thermostat up to 40 °C.
What electrical supply does it require?
This model operates at 230 V and has a power rated at 3 kW. The electrical installation must be correctly sized and protected for the power equipment.
