Accessories for Above-Ground Pools | Piscinasyproductos.com

Home Above-ground pools Accessories and components for above-ground pools

Skimmer and nozzles for above-ground pools

Manguera de conexión 68 cm - Ø38 mm Gre 60222

Preguntas frecuentes sobre Accessories and components for above-ground pools

Which accessories and components are essential for above-ground pools?

The essential components for a properly functioning above-ground pool include filtration, circulation, access, and water-treatment equipment. To ensure a safe, functional setup in 2026, you need:

Return and suction system, consisting of a surface skimmer and leak-free connection hoses.
Compatible filtration equipment, such as a filter pump sized for the water volume.
Safe access with a Gre ladder for above-ground pools, model AR11680 with non-slip steps.
Dosing equipment, such as a floating or inline dispenser for disinfectant.

Having these items prevents water from stagnating, avoids overloading the motor, and protects the liner from accidental punctures caused by sudden surges.

I have an above-ground steel-wall pool that’s leaking around the return inlet. Which replacement part do I need?

Water leaking around the inlets is usually caused by hardened rubber seals or cracks in the plastic body, which is under constant strain. For punched steel walls, the usual solution is to install a complete assembly such as the Skimmer + AR100 return inlet, which includes double seals to press the liner tightly against the metal wall and create a watertight seal. Before installing the new component, clean any limescale and rust from the punched frame to prevent tiny imperfections from stopping the seal from sitting flat.

How can I tell if 32 mm or 38 mm hoses are compatible with my filter pump?

Compatibility depends directly on the outside diameter of the connection fittings and the type of connector on your pool equipment. Above-ground pools use two main standards:

32 mm connection: common in small above-ground pools with metal clamps fitted over ridged connectors.
38 mm connection: used in higher-flow pumps, often with 1.5-inch threaded couplings.

Measure the outside diameter of the skimmer and filter pump connections with a caliper. If your filter has 38 mm threaded connections but your pool has smooth 32 mm fittings, you must install reducing adapters to ensure a watertight seal and prevent air from entering and causing the pump to lose its prime.

I’ve found a leak in the bottom of the pool. Is it worth repairing, or should I replace the entire liner?

Small punctures up to 5 centimeters can be sealed immediately underwater using a Starpool liner repair kit, which includes reactive vinyl adhesive and PVC patches, without needing to drain the pool. However, if the PVC liner is generally discolored, feels stiff, or has multiple tears in the folds caused by UV aging, it is more cost-effective to install a new liner with a thickness of 20/100 to 40/100, depending on your pool’s height, to prevent unexpected water bursts.

What is the difference between an external surface skimmer and a hanging skimmer for above-ground pools?

An external wall-mounted skimmer is screwed directly onto the cutout in the steel wall, while the hanging model is fitted with a movable arm over the upper tubular frame without puncturing the PVC pool liner. The external skimmer provides greater suction capacity to the filtration pump and allows you to connect hose adapters for pool sweepers or a vacuum cleaner port with a fully watertight seal. By contrast, the suspended model is designed for soft-sided, self-supporting pools that cannot have permanent mechanical punctures in their perimeter liner.

I’m upgrading from a cartridge filter to a sand filter. What additional accessories should I add to my order?

When replacing a basic cartridge filter with a sand filter system, the plumbing must be modified to handle higher flow rates and greater operating pressure. Check the following components before completing your order:

Suitable filter media: silica sand or calibrated filter glass, according to the kilograms the tank can hold.
Reinforced connection hoses designed to withstand continuous suction without collapsing.
Multiport valve with labeled settings for backwashing, rinsing, and recirculation.
Perimeter shutoff ball valves to isolate the circuit during maintenance.

Installing shutoff valves between the return jet and the filter allows you to clean the pre-filter without draining the pool.

What warranty and delivery time apply to pool replacement components in 2026?

All pool components and spare parts sold come with the applicable official European Union warranty against manufacturing defects or original leaks. We process orders for in-stock technical equipment for fast dispatch, ensuring your replacement parts arrive in time for the start of swimming season. For specific delivery times for your area, available carriers, or exact return conditions, review our store’s legal information before placing your order.