Trampolines and slides for pools

The minimum required depth depends on the type of accessory you choose to install in the pool:

• Flexible diving boards and springboards: require a diving well with a minimum depth of 2.00 to 2.50 meters at the point of impact to prevent injuries from hitting the bottom.
• Curved or straight slides: generally require a minimum water depth of between 1.10 and 1.20 meters at the exit into the pool.
• Fixed starting platforms: require at least 1.80 meters in standard residential installations.

Checking the pool floor slope before anchoring prevents critical safety issues during swimming.

Metal components must be made of AISI-316 stainless steel to withstand the water’s salinity without rusting. The slide surface should be made of resin-coated fiberglass with a high-density protective gelcoat, which helps prevent sun wear and degradation from salt compounds. For vertical access points, check that the steps and handrails have polymer-insulated fasteners or treated mounting plates. You can reinforce safety around salt water with a stainless steel handrail.

For safe installation, the base must be secured to a reinforced concrete slab at least 15 centimeters thick using chemical anchor bolts or metal expansion bolts. A diving board must not be installed directly on loose tiles, floating decking, or hollow coping, since the leverage generated by a jump multiplies the force on the mounting hardware. The process involves drilling into the concrete, cleaning the hole with compressed air, injecting the resin compound, and inserting the stainless steel threaded bolt. Once fully cured, the base is secured with vibration-resistant self-locking nuts.

The choice mainly depends on the available space on the pool deck and the desired drop radius:

• Slides with a right or left turn: make the most of the pool’s corners, reduce the amount of straight-line space they occupy on land, and slow the user down before they enter the water.
• Traditional straight slides: require more clear space in front of the pool, allow for faster sliding, and provide a direct, unobstructed view throughout the user's ride.

For both models, make sure the structure has continuous high handrails and textured, non-slip steps to minimize the risk of accidental slips while climbing.

Annual maintenance of pool trampolines and slides requires inspecting critical anchor points, tightening the fasteners with a torque wrench, and cleaning the fiberglass slide with fresh water to remove limescale deposits. During long periods of non-use or winter, protect exposed surfaces with UV-resistant waxes or purpose-made covers. Also, periodically check the jumping board's flexibility for microcracks in the structural laminate that could compromise the manufacturer's recommended maximum load capacity.

The system works by connecting directly to the pool filtration system's return nozzle or an external water supply hose. This lubrication water inlet directs a steady flow to the top of the slide, spreading a thin film of water over the entire sliding surface. This continuous flow dramatically reduces skin friction, prevents the polyester from overheating in the summer sun, and optimizes the user's speed until they hit the water. The installation usually includes a shutoff valve to adjust the flow rate to suit usage needs.

Trampolines designed for home use typically support between 100 and 160 kilograms of dynamic point load. This capacity is determined by the thickness of the resin-coated fiberglass layers and the calculated elasticity of the flexible board. In children's or compact models, the load limit may be as low as 80 kilograms, while fixed jumping platforms with reinforced cores easily support higher limits. Always check the model's technical specifications to ensure safe use within the rated limits.