GRE HPGIC45 Full Inverter WiFi heat pump for pools up to 45 m³
GRE HPGIC45 Full Inverter WiFi heat pump for pools up to 45 m³ subject to supplier availability.
Estimated delivery time: 7 to 10 business days (bulky item)
Description
Description
The GRE HPGIC45 Full Inverter heat pump is designed to heat swimming pools of up to 45 m³. It offers a heat output specified by GRE of 7 kW, Full Inverter control, WiFi connectivity via Fluidra Pool®, and operation at outdoor temperatures from -7 ºC to 43 ºC.
45 m³ is the maximum volume specified by GRE. The climate, desired temperature, wind, use of a pool cover, and heat loss may make it advisable to choose a larger heat pump, especially when the pool is close to the maximum volume limit.
What does the GRE HPGIC45 offer?
Full Inverter performance: power and consumption vary according to conditions and demand. At A26/W26, the HPGIC45 modulates between 7.0 and 1.2 kW, with consumption of 1.1 to 0.1 kW and a COP of 6.4 to 12.2.
Hydraulic installation
The HPGIC45 is installed outdoors and uses Ø50 mm hydraulic connections. The recommended flow rate for this model is 3 m³/h.
The connection must be made using a by-pass, allowing the flow through the heat exchanger to be adjusted and the pump to be easily isolated for maintenance or winterization.
Electrical supply: 220–240 V single-phase / 50–60 Hz. Installation must comply with the manufacturer's instructions and applicable regulations.
GRE HPGIC range comparison
Compare the HPGIC30, HPGIC45, HPGIC60, and HPGIC75 models. The highlighted column corresponds to the model you're viewing.
The following data is common to the HPGIC30, HPGIC45, HPGIC60, and HPGIC75 models. The table below shows only the features that differ between models.
| Feature | HPGIC30 | HPGIC45 CURRENT MODEL | HPGIC60 | HPGIC75 |
|---|---|---|---|---|
| Selection and performance | ||||
| GRE maximum volume | 30 m³ | 45 m³ | 60 m³ | 75 m³ |
| Power specified by GRE | 5 kW | 7 kW | 9 kW | 13 kW |
| Heating capacity A26/W26 | 4.5 – 1.2 kW | 7.0 – 1.2 kW | 9.0 – 1.5 kW | 12.0 – 2.2 kW |
| Consumption A26/W26 | 0.8 – 0.1 kW | 1.1 – 0.1 kW | 1.5 – 0.1 kW | 2.1 – 0.1 kW |
| COP A26/W26 | 6,0 – 12,2 | 6,4 – 12,2 | 6,0 – 13,3 | 5,8 – 15,4 |
| Heating capacity A15/W26 | 3.5 – 1.2 kW | 5.5 – 1.2 kW | 7.0 – 1.6 kW | 9.0 – 2.1 kW |
| COP A15/W26 | 5,0 – 6,4 | 5,1 – 6,4 | 5,0 – 6,6 | 4,7 – 7,9 |
| Key differences | ||||
| Recommended flow rate | 3 m³/h | 3 m³/h | 4 m³/h | 5 m³/h |
| R32 charge | 300 g | 300 g | 450 g | 600 g |
| Sound pressure at 10 m | 31 – 19 dB(A) | 31 – 19 dB(A) | 31 – 19 dB(A) | 34 – 20 dB(A) |
| Dimensions | 75 × 30 × 50 cm | 85.8 × 38.3 × 64.8 cm | 85.8 × 38.3 × 64.8 cm | 85.8 × 38.3 × 64.8 cm |
| Weight | 40 kg | 40 kg | 43.5 kg | 47 kg |
Selection note: volumes are the manufacturer's reference maximums. Outdoor temperature, heat loss, and use of a cover may make it advisable to choose a higher-power heat pump.
Frequently asked questions
Is the HPGIC45 suitable for any 45 m³ pool?
45 m³ is the maximum specified by GRE. If the pool is close to this volume, is in a cold or windy area, does not use a cover, or is intended to be kept at a high temperature for long periods, it is advisable to check the sizing before choosing the unit.
Can it operate in below-zero outdoor temperatures?
Yes. The specified outdoor temperature range for the range is -7 ºC to 43 ºC. Available performance varies depending on the outdoor temperature, water temperature, and heating demand.
