CTX-393.0 MultiAction 5 250 g Tablets 25 kg – 0% Boric Acid
CTX-393.0 MultiAction 5 250 g Tablets 25 kg – 0% Boric Acid subject to supplier availability.
Description
Description
CTX-393.0 MultiAction 5 25 kg for pools
Multifunction treatment with slow, continuous dissolution that combines disinfection, algaecidal action, flocculation, coagulation, and chlorine stabilization to simplify weekly maintenance of the water.
- 250 g multiaction tablets
- 25 kg professional container
- Slow, continuous dissolution
- Weekly treatment
- Disinfecting and algaecidal action
- Flocculant and coagulant action
- 0% boric acid
- Non-oxidizing solid product
Five functions for weekly pool maintenance
What does CTX-393.0 MultiAction 5 provide?
CTX-393.0 MultiAction 5 is a solid compound in 250 g tablets formulated to perform several maintenance functions. maintenance with a single application.
Its disinfecting action helps eliminate bacteria, viruses, and other microorganisms. At the same time, it hinders algae growth and helps remove fine particles through its actions flocculant and coagulant.
The slow, continuous dissolution allows the progressive release of the treatment, helping keep the water transparent, crystal clear, and properly disinfected for several days.
When is it advisable to use it?
- During weekly pool maintenance.
- In pools constructed with ceramic materials.
- When you want to combine five functions in a single product.
- To prevent algae growth.
- To improve water transparency.
- In large-volume or frequently used pools.
- In communities, hotels, and sports facilities.
Recommended dosage
| Treatment type | Approximate dosage | Instructions |
|---|---|---|
| Start of season | 15 g of ClorShock per m³ of water | Carry out shock treatment and, after 2 hours, check and adjust the pH between 7.2 and 7.6. Repeat when you notice a lack of transparency. |
| Maintenance treatment | 1 250 g tablet per 25 m³ | Add a new tablet every 7–10 days, with the pH previously adjusted and adapting the dose to the pool conditions. |
Instructions for use
Adjust the pH
Check the water beforehand and adjust the pH between 7.2 and 7.6 to to achieve maximum treatment effectiveness.
Inserting the tablets
Place the required dose inside the skimmers, avoiding direct contact with the pool lining.
Maintain filtration
Start the equipment so that the water circulates through the skimmers, and the tablets must dissolve progressively.
Technical and commercial characteristics
| Brand | CTX Pro |
|---|---|
| Product name | CTX-393.0 MultiAction 5 |
| Reference | 75369 |
| Commercial format | 25 kg professional container |
| Content per unit | 1 × 25 kg |
| Weight of each tablet | 250 g |
| Product type | Multi-action chlorine tablet treatment |
| Functions | Disinfection, algaecidal action, flocculation, coagulation, and chlorine stabilization |
| Appearance | Solid tablets |
| Color | White and blue |
| pH at 1% | Between 2.5 and 3 |
| Dissolution | Slow and continuous |
| Effectiveness period | Weekly |
| Boric acid | 0 % |
| Classification | Non-oxidizing solid product |
| Maintenance dose | 1 tablet per 25 m³ every 7–10 days |
| Recommended free residual chlorine | Between 0.5 and 2 mg/l |
| Recommended application | Inside the skimmers |
| Recommended pool type | Swimming pools built with ceramic materials |
| Not recommended for | Liner, polyester, vinyl, and painted surfaces |
| Recommended use | Communities, hotels, sports facilities, large swimming pools volume and professional maintenance |
Recommended water values
pH level
Keep the water pH between 7,2 y 7,6. A pH properly adjusted allows chlorine to act more effectively and improves swimmer comfort.
Free residual chlorine
Maintain free residual chlorine between 0.5 and 2 mg/l. The technical data sheet recommends checking chlorine and pH at least twice a day.
Important use and safety information
Use biocides safely. Always read the label and the data Read the technical data sheet and the safety data sheet before using the product.
- Do not mix the product with other chemicals.
- Place the tablets only in the skimmers or in a compatible dispenser. compatible.
- Do not place the tablets directly on the bottom or the coating.
- Do not apply the product while swimmers are in the pool.
- Do not use in direct contact with liner, polyester, vinyl or painted surfaces.
- Keep the container closed and out of reach of children.
- Avoid direct contact with skin and eyes.
- Store the product in a cool, dry and well-ventilated place.
- Always follow the manufacturer's label instructions.
Frequently asked questions
What functions does CTX-393.0 MultiAction 5 perform?
It combines disinfection, algae prevention, flocculation, coagulation and chlorine stabilization in a single tablet.
What is the maintenance dosage?
The recommended dosage is one 250 g tablet per 25 m³ of water every 7–10 days.
Does it contain boric acid?
No. The formulation of reference 75369 contains 0% boric boric acid.
Is it an oxidizing product?
No. The technical data sheet identifies it as a solid non-oxidizing compound. oxidizing agent.
Can it be used in liner pools?
It must not come into direct contact with liner, polyester, vinyl or painted surfaces, as it may cause discoloration.
Which coatings is it recommended for?
It is recommended for pools built with ceramic materials.
Where should the tablets be placed?
They should be placed inside the skimmers, keeping the filtration system running to promote their gradual dissolution.
Can they be placed directly on the bottom?
No. The tablets must not come into direct contact with the coating, as the localized concentration may cause damage or discoloration.
What should the free chlorine level be?
The manufacturer recommends maintaining the free residual chlorine between 0.5 and 2 mg/l.
How much does the container hold?
Reference 75369 corresponds to an individual 25 kg container of CTX-393.0 MultiAction 5 in 250 g tablets.
