SACI [e]TOP WINNER 300 variable-speed pump, 3 HP
SACI [e]TOP WINNER 300 variable-speed pump, 3 HP subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
The 3 HP SACI [e]TOP WINNER 300 pump features a high-efficiency permanent magnet synchronous motor and the [e]JOY speed controller. It lets you adapt filtration operation to each time slot and the pool’s hydraulic requirements.
Its automatic programming and selectable speeds help prevent the pump from running continuously at maximum speed, potentially reducing noise and electricity consumption.
What the [e]JOY variable-speed drive offers
- Timed filtration: schedule up to four daily cycles, setting the time and speed.
- Three direct speeds: V1, V2, and V3 settings for timed operation.
- Automatic mode: operation according to configured time slots and days of the week.
- Filter cleaning: backwash and rinse assistant using BACK WASH.
- Auxiliary functions: programmable lighting control via relay outputs and the option to monitor pressure with an optional transducer.
Energy savings depend on speed settings, operating time, and head losses. The percentages advertised by SACI are based on calculation examples and do not represent guaranteed savings.
Installation and commissioning
- Install the pump in a well-ventilated, dry place protected from sun and rain.
- Check the supply voltage and the required electrical protection.
- Set the initial parameters and operating speeds on the controller.
- Schedule filtration cycles according to the pool’s actual conditions.
Electrical installation must be carried out by qualified personnel. Before working on the drive, disconnect the power supply and wait five minutes before opening its cover, as instructed in the SACI manual.
Technical specifications
| Feature | Value |
|---|---|
| Manufacturer | SACI |
| Model | [e]TOP WINNER 300 |
| Reference | 36108055 |
| Rated power | 3 CV / 3 HP |
| Maximum P2 power | 2.2 kW |
| Motor | Permanent-magnet synchronous |
| Control | [e]JOY variable-speed drive |
| Power supply | 220–240 V single-phase, 50/60 Hz |
| Speed | 700–2,800 rpm |
| Protection | IP55 |
| Permissible ambient temperature | −10 to +40 °C |
| Permissible voltage variation | ±10 % |
| Control connections | 2 digital inputs, 2 relay outputs, and an input for a pressure transducer |
Power and supply specifications are taken from the SACI data sheet; speed range and control functions are taken from the [e]JOY / [e]TOP WINNER 300 manual.
Who is it suitable for?
Recommended: for filtration systems that require a variable-speed pump with a higher rated power than the [e]TOP WINNER 150, and timer control via the [e]JOY drive.
Before choosing: check the operating point (flow rate in m³/h and head in m.w.c.), the filtration system, and the pipe diameter. “3 HP” should not be taken to mean a specific maximum pool volume.
Manufacturer documentation
SACI [e]TOP WINNER 300 technical data sheet (PDF) · Official installation manual (PDF)
How to choose between the [e]TOP WINNER 150 and the 300
The difference in power is important, but knowing only the HP rating or the pool’s cubic meters is not enough to select a pump correctly. You need to check its flow and head curve at the intended operating speed.
| Check | Why it matters |
|---|---|
| Volume and filtration hours | Allows you to estimate an initial target flow rate: water volume (m³) ÷ recirculation hours (h). This is a guideline, not the pump’s actual flow rate. |
| Total dynamic head (m.w.c.) | Includes pressure losses from pipes, fittings, the filter, and elevation changes. The same model delivers different flow rates depending on this resistance. |
| Hydraulic curve at the selected rpm | Indicates whether the model can provide the required flow rate at that head. This is the decisive factor when choosing between the 150 and 300. |
| Existing filter and pipes | The operating flow rate must be compatible with the filter and the permitted water speed in the installation. |
We don’t recommend choosing a pump solely based on a label stating “pools up to X m³.” If you don’t know the total dynamic head, provide the pool volume, filter specifications, and approximate pipe layout so we can assess the right choice.
SACI [e]TOP WINNER 150 and 300 comparison
Two variable-speed pumps with permanent-magnet motors. Select the model based on its operating curve, not solely on its power.
| Feature | [e]TOP WINNER 150 M | [e]TOP WINNER 300 · current model |
|---|---|---|
| SACI reference | 36108050 | 36108055 |
| Power | 1.5 HP / 1.1 kW P2 | 3 HP / 2.2 kW max. P2 |
| Motor | Permanent magnets | Permanent magnets |
| Speed | 600–2,800 rpm | 700–2,800 rpm |
| Control | Integrated variable-speed drive | [e]JOY variable-speed drive |
| View product | View [e]TOP WINNER 150 M | You’re viewing this model |
P2 power is not the constant electricity consumption. The pump adjusts its operation to the selected speed and the installation.
Frequently asked questions
Is the SACI [e]TOP WINNER 300 variable-speed?
Yes. It features a permanent-magnet synchronous motor and an [e]JOY variable-speed drive that lets you adjust the speed between 700 and 2,800 rpm.
Can filtration schedules be programmed?
Yes. The manual allows you to set up to four daily filtration cycles with specific schedules and speeds.
Is it single-phase?
Yes, the [e]TOP WINNER 300 model specifications indicate a 220–240 V, 50/60 Hz power supply.
Will I save 81% on electricity?
A fixed savings percentage cannot be guaranteed. SACI publishes savings examples, but the result depends on the speed, filtration hours, and the pool’s hydraulic conditions.
Is it the same pump as the fixed-speed TOP WINNER 300?
No. The [e]TOP WINNER 300 has a permanent-magnet motor and an [e]JOY variable-speed drive, while the conventional TOP WINNER 300 runs at a fixed speed.
