PQS PICO Dosing RX dosing pump for pools up to 120 m³
PQS PICO Dosing RX dosing pump for pools up to 120 m³ subject to supplier availability.
Description
Description
Automatic dosing using Redox control
The unit monitors the water’s oxidation-reduction potential and activates the peristaltic pump when the reading falls below the programmed setpoint.
Its proportional control adjusts the amount of disinfectant to the detected deviation, avoiding fixed dosing and helping maintain a more stable disinfection level.
It features a digital display, front keypad, and a maximum flow rate of 1.5 l/h. It can be used as support in salt chlorination systems or with compatible liquid disinfectant dosing.
Main features
- Automatic control using Redox or ORP readings.
- Proportional disinfectant dosing.
- Digital display for direct readings.
- Electronic setpoint adjustment.
- Single-point probe calibration.
- Dosing alarm.
- Intuitive programming menu.
- Quiet operation.
- Housing with IP54 protection.
Included accessories
- Redox measurement components.
- 475 mV Redox calibration solution.
- Two Clip’easy collars for Ø50 mm piping.
- Suction and injection tubes and components.
- Accessories required for basic installation.
Technical specifications
| Feature | Specification |
|---|---|
| Brand | PQS |
| Reference | 1D00R25PICFA1 |
| Equipment type | Peristaltic pump with Redox controller |
| Control type | Digital |
| Controlled parameter | Redox or ORP |
| Control type | Proportional |
| Maximum recommended volume | 120 m³ |
| Maximum flow rate | 1.5 l/h |
| Maximum pressure | 1 bar |
| Setpoint adjustment | Redox or ORP |
| Calibration | At one point using a 475 mV solution |
| Display | Digital display |
| Protection | IP54 |
| Level control | Not confirmed in the available documentation |
Frequently asked questions
What does the Redox potential measure?
The Redox potential, or ORP, indicates the water’s oxidizing and disinfecting capacity. The unit uses this reading to start or stop dosing.
What pool size is it recommended for?
It is recommended for pools of up to 120 m³.
Is it an analog or digital pump?
It is a digital unit with a display and front keypad for viewing the reading, programming the setpoint, and calibrating the system.
Can it be used with a salt chlorinator?
Yes. Redox control is especially useful as support in salt chlorination systems, provided that the connection and operation are compatible with the system.
Does it include the disinfectant?
No. The chemical product to be dosed must be purchased separately.
What flow rate does it provide?
The pump offers a maximum flow rate of 1.5 liters per hour and a maximum working pressure of 1 bar.
