E-FLO 1 HP three-phase pool pump with prefilter
E-FLO 1 HP three-phase pool pump with prefilter subject to supplier availability.
Description
Description
The 1 hp three-phase E-FLO is a pump designed for water filtration and recirculation in swimming pools. It combines a flow rate of 18.6 m³/h with a high-capacity prefilter, 50 mm hydraulic connections, and a three-phase motor designed for 400 V electrical installations.
Quick overview
- Power: 1 hp.
- Flow rate: 18.6 m³/h at 8 mWC.
- Power supply: 400 V three-phase.
- Connections: 50 mm.
- Prefilter: 3.5 liters.
- Power consumption: 1,100 W.
- Weight: 14.2 kg.
Efficient filtration and easy maintenance
The E-FLO pump is designed to provide reliable operation in pool installations, with convenient access to the prefilter, good hydraulic performance, and wear-resistant components.
3.5-liter prefilter
Its high-capacity basket traps leaves and debris before they reach the impeller, helping to protect the pump and filtration system.
Tool-free maintenance
Quick access to the prefilter and the double-drain system facilitate routine inspection, cleaning, and draining.
Quiet operation
Its hydraulic and mechanical design is intended to reduce noise during normal operation of the filtration system.
Durable components and three-phase motor
Noryl impeller and diffuser
The impeller and diffuser are made of Noryl, a wear- and corrosion-resistant material suitable for continuous use with pool water.
Three-phase power supply
The EFLO10050T model operates on a 400 V three-phase power supply, so it must be connected to a compatible and properly protected electrical installation.
Installation with 50 mm connections
The EFLO10050T model has 50 mm hydraulic inlet and outlet connections. Before replacing another pump, the dimensions, connection positions, required flow rate, and circuit head loss must be checked.
E-FLO range models
| Reference | Power | Connections | Power supply |
|---|---|---|---|
| EFLO07550M | 0.75 CV | 50 mm | Single-phase |
| EFLO10050M | 1 CV | 50 mm | Single-phase |
| EFLO10050T | 1 CV | 50 mm | Three-phase |
| EFLO15050M | 1.5 CV | 50 mm | Single-phase |
| EFLO15050T | 1.5 CV | 50 mm | Three-phase |
| EFLO20050M | 2 CV | 50 mm | Single-phase |
| EFLO30050M | 3 CV | 50 mm | Single-phase |
| EFLO30050T | 3 CV | 50 mm | Three-phase |
Slide horizontally to view the entire table.
Technical specifications of the three-phase 1 CV E-FLO
| SKU / reference | EFLO10050T |
|---|---|
| Power | 1 CV |
| Power supply | 400 V three-phase, 50 Hz |
| Flow rate | 18.6 m³/h at 8 m.w.c. |
| Input power P1 | 1,100 W |
| Output power P2 | 750 W |
| Current | 2 A |
| Inlet / outlet | 50 mm |
| Prefilter capacity | 3.5 liters |
| Length | 590 mm |
| Weight | 14.2 kg |
| Maximum water temperature | 50 °C |
| Maximum pressure | 2.5 bar |
| Mechanical seal | AISI 316, suitable for salt water |
| Motor protection | IP55 |
| Insulation class | F |
| Motor speed | 2,850 rpm |
Slide horizontally to view the entire table.
Frequently asked questions
What flow rate does the EFLO10050T provide?
The documentation indicates a flow rate of 18.6 m³/h at a head of 8 meters.
Is it a three-phase pump?
Yes. The EFLO10050T model operates with a 400 V three-phase power supply.
What size are the connections?
The hydraulic inlet and outlet of this model are 50 mm.
What is the capacity of the prefilter?
It includes a prefilter with an approximate capacity of 3.5 liters.
Is it suitable for salt water?
The mechanical seal incorporates AISI 316 stainless steel and materials suitable for working with salt water under the conditions established by the manufacturer.
Can it be connected to a single-phase power supply?
Not directly. This version requires a 400 V three-phase power supply and the corresponding electrical protections.
