QP 201101Q Automatic Winterizing Dispenser – 2 kg
QP 201101Q Automatic Winterizing Dispenser – 2 kg subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
The QP 201101Q Automatic Winterizing Dispenser provides a complete, continuous treatment throughout the winter, combining disinfectant, algaecide and flocculant action. The container itself works as a floating dispenser, gradually releasing the product to help preserve the water during the months when the pool is used less and make it easier to restore at the end of the winterizing period.
Winterizing treatment
- Provides gradual chlorination throughout the winterizing period.
- Helps prevent the formation of algae and bacteria.
- Promotes the coagulation of suspended particles and organic matter.
- Helps ensure these particles can later be removed through filtration.
- Helps keep the water clearer during the months when the pool is used less.
- The container itself acts as a dispenser, so it must not be opened or refilled.
To prevent the dispenser from resting against the pool wall for too long, the manufacturer recommends running the filtration system for approximately 1–2 hours a day.
Product details
| Product | Automatic Winterizing Dispenser |
| Brand | QP / Quimicamp Piscinas |
| Reference | 201101Q |
| Size | 2 kg |
| EAN | 8410189024230 |
| Dosage | 1 dispenser per 50 m³ |
| Duration | Approx. 7–9 weeks |
| Action | Disinfectant, algaecide and flocculant |
| Registration | 21-60-11184 |
Instructions for use
Adjust the dosage
For a 50 m³ pool, cut off the single row of three protrusions or tabs located on both sides of the dispenser. If a higher dosage is needed, more protrusions can be cut off following the same procedure and the label instructions.
Place it in the water
Place the dispenser directly in the pool and let it float freely upside down.
Run the filtration system
Run the filtration system for approximately 1–2 hours a day. As the product is used up, the dispenser will begin to tilt. Leave it in the water until it is completely tilted or lying down before replacing it.
Frequently asked questions
How long does the dispenser last?
The approximate duration stated by the manufacturer is 7 to 9 weeks, depending on the conditions of use.
How do I know when it is empty?
As the product is used up, the dispenser begins to tilt. Leave it in the water until it is completely tilted or lying down before replacing it.
What pool volume is it recommended for?
The recommended dosage is 1 dispenser per 50 m³. Do not use in pools smaller than 40 m³.
Can it be used in above-ground pools?
No. The manufacturer states that this product must not be used in above-ground pools.
Do I have to open the container?
No. The container itself acts as a dispenser and must not be opened or refilled.
What if I need a higher dosage?
The product’s release can be increased by cutting more tabs, always following the label instructions.
