Electrolysis + hydrolysis + ionization Aquascenic HD1. Sugar Valley. 11506

The new low-salinity Electrolysis + Hydrolysis + Ionization equipment Aquascenic HD1 uses three disinfection methods to achieve perfect water sterilization without the need to add any chemical product.

Hydrolysis breaks down the water molecule, thereby generating oxygen-based disinfecting agents (O³, O², OH...). Electrolysis uses the chlorides present in the water (no need to add salt) to produce HClO (a disinfectant). As a third disinfection system, it uses copper and silver ionization, producing an algaecidal, bactericidal, and flocculating effect to provide residual disinfection.

With the new Aquascenic HD1 Hydrolysis + Ionization + Low-salinity Electrolysis equipment, you will have a comprehensive solution for treating water with maximum effectiveness.

Operation

We will explain the operating principles of the “AQUASCENIC” low-salinity Electrolysis + Hydrolysis + Ionization equipment.

Low-salinity Hydrolysis and/or Electrolysis.

Water is made up of 2 parts hydrogen and 1 part oxygen (H2O).
Hydrolysis etymologically means decomposition by water. Hydrolysis is a process for generating hydrogen and oxygen through electricity and water.
When an electric current passes through water, the chemical bond breaks. The negative charges, or oxygen ions, migrate to the positive electrode (anode). The positively charged hydrogen ions are attracted to the negative electrode (cathode). The decomposition that occurs is as follows:

Electrical energy +2 H²O → 2 H² + O²

This results in an extra negative charge, since the combination has one more electron than protons. It is now a single negatively charged hydroxide, or hydroxyl ion (OH -).
Hydrolysis involves numerous secondary chemical reactions that also produce ionic species with oxidizing and disinfecting power, such as ozone (O²), monatomic oxygen (O1), and hydrogen peroxide (H²O²).
The electronic circuit in our control box transforms the current (220 V, 50 Hz) into low-voltage, high-amperage direct current. This current is supplied to titanium electrodes activated with noble metals, installed in the water recirculation system in a support specially designed for this purpose.
These insoluble electrodes create a combination of some of the most powerful oxidants available for water disinfection, thereby avoiding the use of chemicals.
If we add a small amount of salt to this treatment—between 1 and 2 g of salt per liter of water—either due to insufficient conductivity or to generate a measurable residual, we can also make the same system generate a low-concentration chlorine residual through salt electrolysis. The products decompose, act, and regenerate. The residual disinfectant generated by electrolysis will not harm the eyes, skin, or health of bathers.
You will not have to worry if your pool runs out of salt, as the system will continue disinfecting in Hydrolysis mode.
The chlorine generated destroys the organic matter and pathogens present in the water, transforming back into sodium chloride (common salt).

Copper (Cu) and silver (Ag) ionization.

The combined use of copper and silver, both with high disinfection capabilities, greatly increases the effectiveness of each of our systems. In addition, in the case of cold water, if supported by the presence of a third compatible element (chlorine), the disinfection progression is geometric.
The addition of metals to water as disinfectants has been used for many years, from Greek culture through the Middle Ages, and even in America during the colonization of the Old West, where a silver dollar was also placed in water barrels. Today, silver ions are added to beverages as common as beer, spirits, and wine.

Oxidation reactions.

Ion-producing reaction (at the anode)

Cu++ Cu²+ + 2e-

Ag++ Ag+ + 1e-

Technical specifications of the AQUASCENIC range

DESCRIPTION	HD 1	HD 2	HD 3
ELECTRONIC UNIT
Intensity	0 - 100 %
Salinity	from 1.5 g to 100 g NaCl/l
Pool m³ (< 28ºC)	65 m³	100 m³	200 m³
Pool m³ (> 28ºC)	40 m³	80 m³	125 m³
Display	2.8" full-color TFT display, removable for remote installation (12 languages)
Power supply	220 V 50/60 Hz
Output	8-8 A	8-15 A	8-20 A
Maximum consumption	80 W	120 W	160 W
Dimensions	270 x 220 x 115 mm
Electronic unit	Black flame-retardant ABS plastic
Protective cover	Gray ABS plastic
Control	32-bit microprocessor
Intensity regulation	Amperage + Voltage
Ventilation	Heat sink
Self-cleaning	Programmable from 1 to 24 hours
Flow control	Gas sensor		Flow sensor
Hour counter	Yes, customer-accessible
Production control	from 0 to 100%
Alarms	Low conductivity / No flow / pH dosing / Excessive pH out of range / Maximum pH dosing time
Salinity test	Detects g/l of salt (accuracy of ±10%)
Cover production control	Production level configurable from 0–100% depending on whether the pool cover is open or closed
Production by external signal	Production level configurable from 0–100% depending on any external signal (second analog input)
Communications	MODBUS RS485 / WIFI / ETHERNET
Main control outputs	Filtration control / Lighting control / Heating control
Additional control outputs	4 additional user-configurable relay outputs
SALT ELECTROLYSIS CELL
Salt electrolysis cell	5 titanium plates	7 titanium plates	10 titanium plates
Minimum flow rate	5 m³/h	9 m³/h	11 m³/h
Plate dimensions	200 x 45 mm	200 x 45 mm	400 x 45 mm
Cell support material	Transparent PVC plastic
Cell closure	Threaded for easy cell installation
Pipe connection diameter	63 mm
Cell cable	(3 x 4) x 1.5 m
Gas sensor	Built into cell		NO
Maximum pressure	4 kg/cm²
Maximum temperature	45ºC
IONIZATION VESSEL
Number of electrodes	2	4	6
Dimensions (length/Ø)	177 x 141 mm	280 x 141 mm	400 x 141 mm
Connection	2" thread (63 mm)
Vessel material	Transparent ABS
Electrode material	Electrolytic copper and silver