30 m floating cable with swivel, 3 wires, for Dolphin pool cleaner

The 99955747-DIY cable for Dolphin pool cleaners has a total length of 30 m.

This cable has three wires, making it suitable for pool cleaners equipped with a dirty-filter alert, remote control, or cycle selection. If you install a two-wire cable in these pool cleaners, they will lose these functions.

Equipped with a motor connector.

It incorporates the Swivel cable anti-tangling system, which prevents the cable from tangling around itself, thus avoiding forced operation of the pool cleaner and ensuring its ability to access the entire pool without obstacles.

Please note that not all Dolphin pool cleaners use the same type of cable.

As a general rule, if the cable enters the pool cleaner through the top, you will need a cable whose reference ends in -DIY. These cables come with the motor connector already installed, and the opening in the cleaner housing is large enough for the connector to pass through.

If the cable is installed through the side of the pool cleaner, you will need one whose reference ends in -ASSY. These cables have no motor connector at the end, only the wires, and you will need an adapter kit to connect it to the motor. Generally, the opening in the cleaner housing is too small for the cable to pass through with the connector installed at the end; therefore, you must first pass the cable through the opening and then install the motor connector.

30-meter AYN swivel cable ASSY replacement for Dolphin Pro X2 pool cleaner. Reference: 9995747LF-ASSY.

The image shown of the item may not match the actual image of the item for sale.