Hayward SP0715X62E 2" 6-way side-mount selector valve
Hayward SP0715X62E 2" 6-way side-mount selector valve subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
The Hayward SP0715X62E multiport valve is a replacement part for sand filters with 2-inch side-mount installation. It lets you select the six main operating and maintenance functions of the filtration system.
It is listed in the Hayward catalog for filters S0310S and S0360S, so it is a replacement option when the original valve has this part number.
Quick summary
- Brand: Hayward
- Part number: SP0715X62E
- Type: multiport valve
- Positions: 6-way
- Mounting: side / SIDE
- Connections: 2"
Compatible filters
| Part number | Compatible model |
|---|---|
| S0310S | Hayward S0310S sand filter |
| S0360S | Hayward S0360S sand filter |
Compatibility details listed in the official Hayward catalog. Also check the part number of the installed valve.
Frequently asked question
Does it fit a Hayward S0310T or S0360T filter?
No. These models use top-mount (TOP) valves. Hayward specifies part number SP071620E for those filters, while SP0715X62E is for side-mount installation.
Technical specifications
| Feature | Specification |
|---|---|
| Manufacturer | Hayward |
| Part number | SP0715X62E |
| Component | Sand filter multiport valve |
| Installation type | Side (SIDE) |
| Number of ports | 6 |
| Connections | 2 inches |
| Applicable filters | S0310S y S0360S |
Six-position functions
| Position | Function |
|---|---|
| Filter | Circulates water through the filter media. |
| Backwash | Reverses the flow to clean the filter media. |
| Rinse | Settles the filter media after backwashing. |
| Recirculate | Allows water to circulate without passing through the sand. |
| Waste | Direct the water to the drain outlet. |
| Closed | Shut off the water flow through the valve. |
Use and replacement
Before removing the valve, switch off the pump and release the pressure from the circuit following the manufacturer's instructions.
Do not change the valve position while the pump is running. Check the condition of the unions, gaskets, and connections when replacing it.
The exact scope of supply, including any unions or fittings, should be checked before assuming they are supplied with the valve.
