Cable 18 m.- Ø 10 mm, 2 hilos, azul, con Swivel para limpiafondos Dolphin

The 99958907-DIY cable for Dolphin pool cleaners has a total length of 18 m and a diameter of 10 mm.

This cable has two wires, making it incompatible with pool cleaners equipped with functions such as a dirty-filter alert, remote control, or cycle selection. If this two-wire cable is installed in such models, those functions will be disabled.

Equipped with a motor connector.

It incorporates the Swivel cable anti-tangle system, which prevents the cable from tangling around itself, thereby avoiding forced operation of the pool cleaner and ensuring its ability to access the entire pool without obstacles.

Please note that not all Dolphin pool cleaners use the same type of cable.

As a general rule, if the cable enters the pool cleaner through the top, you will need a cable whose part number ends in -DIY. These cables come with the motor connector already installed, and the opening in the cleaner housing is large enough for the connector to pass through.

If the cable is installed through the side of the pool cleaner, you will need one whose part number ends in -ASSY. These cables have no motor connector at the end, only the wires, and you will need an adapter kit to connect it to the motor. Generally, the opening in the cleaner housing is too small for the cable to pass through with the connector installed at the end; therefore, you must first pass the cable through the opening and then install the motor connector.

This cable model is compatible with the following pool cleaners: