30 g/h cell electrode for CTX Go Salt salt chlorinator 70329
30 g/h cell electrode for CTX Go Salt salt chlorinator 70329 subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
The replacement electrode / cell Ref. 70329 restores chlorination capacity in electrolysis equipment whose performance has declined due to wear. With 11 plates, it is designed for a nominal output of 30 g/h, helping to keep the water clear and disinfected with less need for chemical adjustments.
If you notice low production, exhausted-cell warnings, or fluctuations in disinfectant levels despite having the pH adjusted, replacing the cell is usually the most effective measure. The procedure is simple: switch off the power and water flow, loosen the connections (a 13 mm open-ended wrench is usually sufficient), remove the old cell, and install the new one, observing the installation direction. Take the opportunity to clean the cell housing and check the seals before resuming operation.
The image may not exactly match the supplied cell depending on the manufacturer’s version. Check the compatible equipment below and always verify the exact reference of your chlorinator.
Compatible chlorinator equipment:
| Reference | Model | Reference | Model | Reference | Model |
|---|---|---|---|---|---|
| 70289 | CTX Go Salt 30 g | 70299 | CTX Go Salt pH 30 g | 72569 | CTX Sprint Chlore V2 |
| 74082 | Astralpool E-Next 12 |
| Reference | Model |
|---|---|
| 70289 | CTX Go Salt 30 g |
| 70299 | CTX Go Salt pH 30 g |
| 72569 | CTX Sprint Chlore V2 |
| 74082 | Astralpool E-Next 12 |
On mobile devices, this table is displayed in 2 columns (Reference and Model).
