Spa Clean. Spa cleaning tablet.

SpaClean is a cleaning tablet specially formulated to deep-clean the inside of spas, including their plumbing and equipment.

Instructions for use:

• Remove the filter and open the valves. Increase your spa’s chlorine level to 3–5 ppm before starting the treatment.
• Make sure that both the air and water outlets and the valves are open.
• Dissolve the SpaClean tablet by holding it in the flow of a running jet, or add it to the filter basket you have removed.
• If desired, you can also dissolve the tablet in a bucket of hot water before adding it to the spa water.
• Run the pumps at maximum power for 20 minutes to allow good flow.
• Repeat the pump activation process at least 2 or 3 times during the cleaning process. The recommended treatment time is between 6 and 12 hours, or overnight.
• Once the treatment is complete, run the pumps before emptying the spa/jacuzzi, then rinse it thoroughly with clean water.
• Do not use any cleaner. Replace the filters, refill the spa with fresh water, and add the normal amount of chlorine or disinfectant you usually use.
• Resume or begin water treatment maintenance for hot tubs with AquaFinesse.

If foam appears during the cleaning process, do not touch or inhale it.