AstralPool spa blower pump 06863, 1.5 HP single-phase 230 V
AstralPool spa blower pump 06863, 1.5 HP single-phase 230 V subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
The AstralPool 06863 blower pump is designed to supply air to bubble massage systems in spas and hot tub installations.
Its 1.5 CV (1.10 kW) single-phase motor delivers an airflow of 133 m³/h, suitable for installations that require more air than the 1 CV model.
Illustrative image. The appearance of the equipment may vary depending on the version supplied.
Technical specifications
| Feature | Value |
|---|---|
| Brand | AstralPool |
| Reference | 06863 |
| Type | Air blower pump |
| Power | 1.5 CV / 1.10 kW |
| Power supply | 230 V single-phase |
| Airflow | 133 m³/h |
| Operation | Intermittent |
| Run time | 14 minutes |
| Off time | 30 seconds |
| Maximum air temperature | 40 °C |
| Motor protection | IPX2 |
Dimensions and installation
| Drawing measurement | Dimension |
|---|---|
| A | 372 mm |
| B | 193 mm |
| C | 60.5 mm |
| D | 50.5 mm |
| E | 176 mm |
Dimensions A–E according to the manufacturer's technical drawing.
Safety recommendations
- Electrical installation must be carried out by qualified personnel.
- A residual-current device rated at no more than 30 mA is required.
- Water must be prevented from entering the motor.
- Operating cycles must be observed.
AstralPool blower pump comparison
Compare the two models to choose the right airflow for your spa.
| Model | Power | Power supply | Flow rate | Operation |
|---|---|---|---|---|
| 06862 — View model | 1 CV / 0.74 kW | 230 V | 65 m³/h | Intermittent |
| 06863 — Current model | 1.5 CV / 1.10 kW | 230 V | 133 m³/h | Intermittent |
Swipe horizontally to view the table on mobile devices.
Frequently asked questions
What is the difference between the 06862 and 06863 pumps?
The 06862 has 1 CV of power and delivers 65 m³/h, while the 06863 has 1.5 CV and delivers 133 m³/h. Both are single-phase, 230 V models for intermittent use.
Can it run for several hours at a time?
No. The manufacturer specifies cycles of 14 minutes running and 30 seconds stopped. It must not be used as a continuous-duty blower.
Is it used to pump air or water?
This pump delivers clean air for bubble massage systems. It does not replace the water pump responsible for circulating water in the spa.
What should I check before installing it?
The 230 V power supply, flow requirements, available dimensions, and connection to the air circuit. Electrical installation must be carried out by qualified personnel.
See other spa and hot tub equipment and accessories.
