Astrapool E-Next 30 Salt Chlorinator, 30 gr/h

The E-NEXT range of salt chlorinators provides a high degree of automation, allowing you to relax and fully enjoy your pool.

They are designed to disinfect pools of up to 180 m³.

Thanks to their compact design, they can be installed in most equipment rooms, even the dampest ones, thanks to their IP45 protection.

Its features are nothing short of impressive: it includes a gas detector that will immediately stop the chlorinator if there is no flow in the pipe where it is installed. This prevents chlorine gas from accumulating anywhere in the installation and the consequent risk of a burst caused by overpressure.

It also includes a warning light to alert you when the salt level in the pool water is low, so you will not have to constantly carry out inconvenient measurements. Remember that for this chlorinator model, the optimal salt level in the water should be between 4 and 6 g/l.

You will not need to worry about cleaning the cell either, as this operation is carried out automatically every 2–3 hours by reversing the polarity in the cell.

Chlorine production can be set to 50%, 75%, or 100%, as required.

ASTRAPOOL E-NEXT SALT CHLORINATOR RANGE.

	*	*	*	*	*
Reference	E-Next 7	E-Next 12	E-Next 21	E-Next 30	E-Next 40
Chlorine production (g/h)	7 g/h	12 g/h	21 g/h	30 g/h	40 g/h
Maximum pool volume (m³)	30 m³	50 m³	90 m³	140 m³	180 m³
Minimum flow rate (m³/h)	2 m³/h	3 m³/h	5 m³/h	6 m³/h	8 m³/h
Salinity range (g/l)	4–6 g/l
Electrodes	3 Plates	5 Plates	7 Plates	11 Plates	13 Plates
Production control	0-50-75-100 %
Low salt alarm
Gas detector
Cover production control
Cell lifespan	8,000–10,000 hours
Self-cleaning through polarity reversal	(2–3 hours)
Voltage	230 V/50/60 Hz
Amperage	0.2 A	0.4 A	0.4 A	0.8 A	0.9 A
Fuse	2A

* The image may not correspond to the item offered.