Astrapool E-Next 12 Salt Chlorinator, 12 gr/h

The E-NEXT range of salt chlorinators provides a high degree of automation, allowing you to relax and fully enjoy your pool.

They are designed to disinfect pools of up to 180 m³.

Thanks to their compact design, they can be installed in most plant rooms, even the dampest ones, thanks to their IP45 protection.

Its equipment is nothing short of impressive: it has a gas detector that immediately stops the chlorinator if there is no flow in the pipe where it is installed. This prevents chlorine gas from accumulating at any point in the system and the consequent risk of a pressure-related rupture.

It also includes a warning light to alert you when the pool water has a low salt level, so you will not have to carry out inconvenient measurements constantly. Remember that for this chlorinator model, the optimum salt level in the water should be between 4 and 6 g/l.

You will not need to worry about cleaning the cell either, as this operation is carried out automatically every 2–3 hours by reversing the polarity in the cell.

Chlorine production can be set to 50%, 75%, or 100%, as required.

ASTRAPOOL E-NEXT SALT CHLORINATOR RANGE.

	*	*	*	*	*
Reference	E-Next 7	E-Next 12	E-Next 21	E-Next 30	E-Next 40
Chlorine production (g/h)	7 g/h	12 g/h	21 g/h	30 g/h	40 g/h
Maximum pool volume (m³)	30 m³	50 m³	90 m³	140 m³	180 m³
Minimum flow rate (m³/h)	2 m³/h	3 m³/h	5 m³/h	6 m³/h	8 m³/h
Salinity range (g/l)	4–6 g/l
Electrodes	3 plates	5 plates	7 plates	11 plates	13 plates
Production control	0-50-75-100 %
Low salt level alarm
Gas detector
Cover production control
Cell lifespan	8,000–10,000 hours
Self-cleaning by polarity reversal	(2–3 hours)
Voltage	230 V/50/60 Hz
Amperage	0.2 A	0.4 A	0.4 A	0.8 A	0.9 A
Fuse	2A

* The image may not correspond to the item offered.