WYBOT

A battery-powered autonomous unit avoids overloading the main pumping system and ensures comprehensive geometric coverage through electronic navigation. Operating independently of the hydraulic circuit, it does not require priming hoses or cleaning the pump's pre-filter after each cycle.

Unlike suction systems such as the Zodiac MX8 automatic pool cleaner, which require a minimum flow rate to turn their turbines, cordless robots collect debris in their own removable filter basket with micron-level filtration. This directly results in significant savings in water used to wash the sand filter and less time spent on periodic startup.

The maneuvering system constantly monitors the charge level and moves the machine toward the edge when the available energy falls below the safe operating threshold.

This algorithm activates a specific movement sequence that prioritizes the following steps:

• Detection of the nearest wall using contact sensors and inclinometers.
• Controlled braking of the suction motor to channel the remaining power to the drive tracks.
• Stops beside the waterline on an accessible side so it can be retrieved with the supplied floating hook.

Thanks to this mechanism, users never need to get into the water to retrieve the robot after cleaning is complete.

Models designed for complex surfaces feature toothed tracks with a high coefficient of friction and a calibrated center of gravity that helps them grip steep slopes. The propellers' rotational speed generates sufficient vertical suction to hold the chassis against the vertical wall.

In pools with a liner or polished tile, the active-friction brushes remove biofilm before the wheels cross the curve between the floor and the wall. If the incline exceeds the recommended operating angles, the internal gyroscope immediately reorients the direction of travel, ensuring that the unit does not end up overturned on the bottom.

The usual charging time ranges from 2.5 to 4 hours, depending on the rated capacity of the integrated battery in each model. It is essential to carry out the process with the chassis dry and use only the approved transformer to prevent overvoltage at the sealed terminals.

A full charge provides between 90 and 120 minutes of continuous intensive cleaning of the floor, walls, and waterline. To extend the life of the lithium cells, store the robot in a frost-protected area and connect the charger when the indicator light shows that the battery is depleted. Don't leave it for weeks with the battery at zero.

Certain models feature wireless connectivity for scheduling work and selecting specific areas before placing the device in the pool. Synchronization takes place at the surface via the home network or a direct connection between the device and the robot's baseboard.

The app lets you set essential parameters:

• Selecting either floor-only cleaning or a complete cycle covering the walls and waterline.
• Setting the start timer to coordinate cleaning with the pool's rest periods.
• Checking the charge percentage and diagnosing the status of the internal filters.

Once submerged, the device follows its programmed map completely autonomously, without requiring in-person supervision.

Preventive maintenance requires emptying and rinsing the micrometric filter basket after each cycle in the water. The buildup of plant debris or compacted grains of sand reduces suction flow and overheats the drive motor.

Unlike mechanical suction alternatives such as the Zodiac T5 Duo automatic pool cleaner, whose disc chamber depends on the vacuum created by the filtration pump, the cordless robot collects leaves and dirt in an upper compartment that opens easily with a quick-release tab. Simply rinse it with running water from a garden hose, without using solvents or abrasive metal brushes.

The electronic components and batteries are sealed to the IPX8 waterproofing standard, suitable for continuous immersion, and withstand standard salinity levels in domestic pools. Current European legislation provides legal protection against any manufacturing defects in drive parts and control components.

To ensure optimal longevity in water treated with salt electrolysis or traditional chlorine, simply rinse the outer casing with fresh water after removing it and check that the magnetic charging ports are dry before plugging them into the mains. Piscinas y Productos handles official after-sales support by providing verified replacement parts.