DOLPHIN SX SERIES

A Dolphin SX Series robot is designed to clean à carrelage, liner, reinforced PVC, fiberglass, and painted concrete without losing traction. Its continuous rubber tracks ensure firm movement across horizontal surfaces and sloped transitions.

For pools with particularly polished ceramic finishes or slippery surfaces due to microalgae growth, the active front brush rotates twice as fast as the tracks, dislodging the slippery film before the suction inlet passes over it.

For a 10x5-meter pool with a continuous slope or diving pit, you need a robot that combines a sufficiently long floating cable with the ability to climb the entire wall. An advanced model in this range ensures complete coverage thanks to its technical specifications:

• Floating cable of suitable length to prevent mechanical strain while moving.
• Track drive mechanism adapted to steep changes in level and curved transitions.
• Ultra-fine filters to trap fine dust and pollen without restricting suction flow.
• Adjustable cleaning cycles between 1.5 and 2.5 hours to cover the entire pool surface.

This configuration prevents dead spots in the deepest corners and reduces the need for additional manual brushing.

The main difference lies in the particle size retained and the ideal time to use them in the water. The filtration basket takes two types of specific panels to keep the water crystal clear:

• Mesh or spring panels: trap large leaves, twigs, and insects when opening the pool or after a storm.
• Ultra-fine microfiltration panels: capture microscopic dust, Saharan sand, and algae spores that cloud the water.

Alternating between both sets according to the level of sediment extends the motor’s lifespan by preventing excessive backpressure inside the debris basket.

Models equipped with a wireless module are managed entirely through the official MyDolphin Plus app installed on your mobile phone. This platform lets you select timed work cycles of 1, 1.5, 2, or 2.5 hours, depending on the level of dirt detected on the pool floor.

From the interface, you can schedule a weekly calendar for the robot to run in the early hours of the morning, or activate remote manual navigation to focus suction on specific areas where more debris accumulates due to wind currents.

The mechanical rotating system known as the anti-tangle swivel counteracts the twisting the cable undergoes as the equipment constantly changes direction. This rotating part prevents the cable from forming tight loops that reduce the effective range of movement or cause mechanical snags in the pool.

In addition, the self-floating cable has calibrated buoyancy that keeps it from sinking to the bottom, eliminating the risk of the tracks or active brush catching the electrical cable during the suction cycle.

The Easy-Clean basket is maintained from the top of the chassis using a one-touch latch mechanism. No tools are needed, nor do you have to remove any housing panels to clean the filter elements.

Once the basket has been removed vertically, simply open the bottom hatch, empty out the solid debris, and rinse the filter panels with a garden hose at moderate pressure. This takes less than two minutes and prevents wear on the independent suction motor.

Models designed for a full cycle climb the vertical wall autonomously and perform a thorough lateral sweep along the waterline. This is where body oils, sunscreen, and floating particles that stain the pool liner accumulate.

Thanks to its drive motor and multidirectional water expulsion system, the robot holds itself at the top edge for several seconds, scrubbing with the active brush before descending again to continue covering the pool floor.