Loading...
AstralPool 2" threaded hydrotherapy jet
AstralPool
| SKU:
33586
36,49 €
Unit price
/
Sold out
Taxes included
AstralPool 2" threaded hydromassage jet is an accessory that can be installed in water + air jets in hydromassage spas. It has a 50 mm water inlet diameter and a 32 mm air inlet diameter.
AstralPool 2" threaded hydrotherapy jet subject to supplier availability.
Estimated delivery time: 3 to 7 business days
Description
Description
AstralPool's 2" threaded hydromassage jet is an accessory that can be installed in water + air jets in hot tubs. It has a 50 mm water inlet diameter and a 32 mm air inlet diameter.
The combination of pressurized water jets and air bubbles creates intense and relaxing hydromassage effects.
It has a flow rate of 4 m³/h and a pressure of 0.8 bar.
Installation
To correctly and easily install AstralPool's 2" threaded hydromassage jet, follow these simple and quick steps.
- Mark a point approximately 200 mm below the normal water level on the spa wall (no. 1).
- Once the center point has been marked, first drill a pilot hole and then use a Ø 60–75 hole saw so that it passes through the nozzle body (no. 2).
- Glue the supplied plug to the jet body (no. 3).
- For greater acceleration of the water as it exits, you can place one of the 3 supplied sleeves inside the restrictor (no. 4).
- Place the jet body on the back of the spa wall and screw the nozzle in from the front, placing a flat gasket on both sides of the spa wall (nos. 5 and 6).
