Pool Equipment Material | Skimmers, Nozzles and Drains

Home Pool accessories Pool shell material

Skimmers

Sinks

Pool nozzles

Pool skimmer replacement parts

Pool drain replacement parts

Preguntas frecuentes sobre Pool shell material

What is considered pool shell material?

The pool shell material includes the components installed directly in the walls, bottom, or hydraulic structure of the pool shell.

This category may include skimmers, return and suction jets, drains, wall fittings, pool cleaner inlets, and other connection components.

Compatibility depends on the type of pool and the hydraulic system used.

What is the function of a pool skimmer?

The skimmer collects water from the pool surface and directs it to the filtration circuit.

It also helps collect leaves, insects, and other floating particles before they settle on the bottom.

They should be selected taking into account the type of pool shell, flow rate, and installation configuration.

What are return jets?

The return jets return water to the pool shell after it has passed through the filtration or treatment system.

Their position and orientation influence the circulation of water inside the pool.

Different models are available depending on the type of pool shell, connection, and pipe diameter.

What is a pool cleaner inlet used for?

The pool cleaner inlet allows certain cleaning systems to be connected to the pool’s suction circuit.

Compatibility depends on the hydraulic system, connection diameter, and type of pool cleaner used.

Before using it, the manufacturer’s and installation instructions must be followed.

What is the function of a pool drain?

The drain is normally installed at the bottom of the pool shell and forms part of the hydraulic suction circuit.

It can be involved in water circulation, drainage, or suction, depending on the installation design.

It must be selected and installed in accordance with the project and manufacturer’s specifications.

What is a wall fitting for a pool?

A wall fitting is a component that allows a connection to pass through the pool shell and creates a hydraulic connection between the inside of the pool and the external pipes.

It is used together with different components such as nozzles, inlets, and other accessories.

It must be selected according to the thickness, wall type, diameter, and connection system.

Does the pool shell material change depending on the type of pool?

Yes. The components may vary depending on whether the pool is made of concrete, liner, prefabricated materials, or another type of pool shell.

The fastening systems, gaskets, and watertightness accessories may differ.

It is important to check that the product is suitable for the specific construction of the pool.

How can I tell if a skimmer or nozzle is compatible with my pool?

It is advisable to check the reference, dimensions, connection diameter, pool-shell type, and fastening system.

If an existing part is replaced, the original reference is the best basis for identifying the right replacement.

Compatibility should not be assumed solely because two parts look similar.

What should I check before replacing a pool-shell part?

You should check the measurements, connections, seals, fastening type, and original reference.

It is also advisable to check whether the product is specifically intended for concrete, liner, or prefabricated pools.

For parts related to watertightness, special attention should be paid to the condition of the seals and contact surfaces.

Can the nozzles be replaced without emptying the entire pool?

It depends on the part’s location, the water level, and the installation design.

In certain cases, it may be necessary to lower the water level to work correctly on the component.

The work must be carried out in a way that preserves the pool shell’s watertightness.

How important are seals in pool-shell accessories?

Seals are part of the watertightness system in many skimmers, nozzles, drains, and wall fittings.

They must be installed in the correct position and replaced when they show wear, deformation, or deterioration.

It is always advisable to use seals compatible with the part and the type of pool shell.

Can I use parts from another brand as replacements?

Only when the dimensions, connections, and mounting system are genuinely compatible.

In many cases, it is safer to look for the replacement corresponding to the original reference.

Visual similarity does not guarantee compatibility between manufacturers.

Are pool-shell accessories suitable for pools with salt electrolysis?

Compatibility depends on the product materials and the manufacturer’s instructions.

For pools with salt electrolysis, it is advisable to specifically check the compatibility of metal components and other materials exposed to the water.

How do I maintain the components installed in the pool shell?

It is advisable to periodically inspect skimmers, nozzles, covers, grilles, and other visible components.

You should also maintain adequate water quality and prevent buildup that could obstruct the hydraulic inlets or outlets.

Damaged or deteriorated parts should be inspected before they affect the system’s operation.

Where can I find other pool accessories?

You can browse our collection of pool accessories, where you’ll find outdoor equipment, lighting, cleaning and safety products, covers, and other pool components.

Are you from the Canary Islands, Ceuta, or Melilla?

Pool shell material

Preguntas frecuentes sobre Pool shell material