Money-Back Guarantee + info

Secure Payment and Financing + info

Starpool


Preguntas frecuentes sobre Starpool

Which Starpool sand filter should you choose based on your pool’s volume?

The diameter of a Starpool sand filter should be calculated to renew all the pool water within a maximum cycle of 4 to 5 hours. The wrong choice can cause overpressure in the filter bed or poor water clarification.

To size the equipment precisely, consider the manufacturer’s following standard capacities:

  • Pools up to 25 m³: the compact Star 300 model with pump delivers the right flow rate for above-ground pools or small pools.
  • Pools from 25 to 45 m³: the Starpool Ø400 mm pool sand filter without pump, with multiport valve handles steady flow rates with silica sand or filter glass.
  • Pools from 45 to 65 m³: the Ø450 mm model with a top-mounted multiport valve maximizes the filtration surface, preventing premature saturation of the filter bed.

Always check your circulation pump’s performance curve before replacing only the filter tank.

I have an in-ground pool with an uneven floor and attached algae. Which Starpool manual pool cleaner should I buy?

Starpool manual pool cleaners made of anodized aluminum have the specific weight needed to stay stuck to the floor without floating during slow passes. Their rigid body transfers force directly to areas where algae colonies thrive.

To optimize maintenance time and pushing effort, the 45 cm model covers more area on large, flat pool floors, while the 35 cm version can maneuver around tight corners and pits with steep slopes. Both heads have a universal butterfly-nut connection for standard telescopic poles. To use them, connect the floating hose to the suction inlet or skimmer with the filtration system running, directing heavy debris straight to the drain when performing a shock clean.

How do you install a 35-liter Starpool solar shower with a foot-rinse tap?

A Starpool solar shower must be firmly mechanically anchored to a perfectly level concrete base positioned to receive maximum sunlight during the day. The tank stores the water, which is heated by direct thermal transfer through its casing.

To ensure proper installation and prevent pressure loss during the 2026 season, use the four included expansion bolts directly on the concrete slab. Connect the inlet using the standard thread to a conventional garden hose tap. The secondary foot-washing tap supplies only unmixed cold water, preserving the main collector’s hot water reserve for the upper showerhead. Drain the entire circuit before the first winter frosts to prevent internal cracks.

I’m closing the pool for the winter. Is the 4x3-meter Starpool cover compatible with any type of coping?

Starpool 4x3-meter winter protection covers fit coping made of artificial stone, concrete, or flat tile that can accommodate perimeter anchors tightened with elastic cords. The high-density polyethylene fabric creates an opaque barrier that blocks photosynthesis in the water.

For a hygienic seal, the pool basin must be at least 20 or 30 centimeters smaller on each side than the liner’s nominal dimensions. This way, the outer overlap compensates for the usual drop in water level during winterization. The cover has reinforced, perforated eyelets that withstand wind tension, and central drainage holes to prevent rainwater from pooling on the fabric.

What maintenance does the Starpool 35 cm aluminum manual pool vacuum need?

The Starpool 35 cm Aluminum Manual Pool Vacuum - Professional Vacuum Head - Wing Nut Connection requires thorough rinsing with fresh water after each use to neutralize any chlorine or oxidizing salt residue. This routine preserves the flexibility of its bristles and the smooth movement of its support wheels.

Check the condition of the retaining pins monthly and make sure the central suction channel is free of packed leaves. When not in use, store the tool in a dry place protected from direct sunlight. This helps prevent the polycarbonate from deteriorating around the wing-nut attachment points.

The liner of my above-ground pool has torn while it’s full of water. Does the Starpool repair kit seal leaks underwater?

The Starpool liner repair kit contains special reactive adhesive and virgin PVC patches designed to cure underwater without draining the pool. The glue reacts with moisture, creating a flexible, waterproof bond.

To successfully carry out the technical repair on the affected pool:

  • Cut the PVC patch into a circular or oval shape to eliminate corners that could lift when the pool vacuum is running.
  • Apply the adhesive evenly to the patch and fold it over itself as you dive toward the tear.
  • Place the patch over the tear, pressing firmly from the center toward the edges for at least 90 seconds.
  • Avoid vigorous brushing in the area for the next 24 hours to ensure the chemical has fully cured.

How many tablets fit in the Starpool floating chlorine dispenser?

The Starpool floating dispenser holds 3 to 5 tablets weighing 200 or 250 grams, depending on whether you choose the 18 cm or 23 cm diameter model. The adjustable lower ring controls the area of contact between the water and the chemical product.

To maintain uniform chlorination without discoloring the glass or PVC lining, adjust the lower slots according to the pool’s total volume in cubic meters and the number of hours of sunlight per day. Never add fast-dissolving tablets to this dispenser, as they are formulated to dissolve in the skimmer basket. When properly weighted, the dispenser floats across the surface, carried by the return jets, distributing the disinfectant evenly.

Compare /4

Loading...