Dolphin
Lower cover + bracket for Dolphin pool cleaner
SKU:9995550
Delivery: 3 to 7 business days
68,42 €Unit price /Sold outDolphin
Power supply connection plug for Dolphin pool cleaner
SKU:5000009
26,53 €Unit price /Sold outDolphin
70-micron fabric filter bag for Dolphin pool cleaner
SKU:99954307-ASSY
Delivery: 3 to 7 business days
29,17 €Unit price /Sold outDolphin
Blue S2 combination brush, Dolphin pool cleaner
SKU:99955383-ASSY
Delivery: 3 to 7 business days
59,51 €Unit price /Sold outDolphin
17 m floating cable with swivel, 3 wires, for Dolphin pool cleaners
SKU:9995873-DIY
Available to order
247,93 €Unit price /Sold outDolphin
Dolphin Power Supply 9995675-ASSY
SKU:9995675-ASSY
Delivery: 3 to 7 business days
213,23 €Unit price /Sold outDolphin
Large Front Wheel Dolphin 99831111 for Automatic Pool Cleaner
SKU:99831111
Delivery: 3 to 7 business days
9,42 €Unit price /Sold outDolphin
Dolphin S2 Pool Cleaner Prefilter Basket.
SKU:9983106
Delivery: 3 to 7 business days
40,66 €Unit price /Sold outDolphin
Dolphin combined brush assembly, gray, Dyn CB
SKU:99955340-ASSY
Delivery: 3 to 7 business days
104,14 €Unit price /Sold outDolphin
Protective cover for Dolphin E35, E40i, or M4 pool cleaner
SKU:9991794
Delivery: 3 to 7 business days
77,26 €Unit price /Sold outDolphin
Complete grey active brush for Dolphin pool cleaner
SKU:9995543-ASSY
Delivery: 3 to 7 business days
48,60 €Unit price /Sold outDolphin
Grey S1 active brush for Dolphin pool cleaner
SKU:9995544-ASSY
Delivery: 3 to 7 business days
38,68 €Unit price /Sold outDolphin
Float for Dolphin pool cleaner cable
SKU:9995090
Delivery: 3 to 7 business days
11,08 €Unit price /Sold outDolphin
Dolphin pool cleaner motor protection mesh
SKU:9982300
Delivery: 3 to 7 business days
5,90 €Unit price /Sold outMaytronics
Gray Diag CB brush assembly, Dolphin pool cleaner
SKU:99955230-ASSY
Delivery: 3 to 7 business days
68,42 €Unit price /Sold outDolphin
Dolphin iOT Wi-Fi V4 power supply, 120 W, 230 V
SKU:99956086-ASSYV4
252,89 €Unit price /Sold outDolphin
Grey S300 drive belt for Dolphin pool cleaner
SKU:9983152
Delivery: 3 to 7 business days
19,84 €Unit price /Sold outDolphin
Yellow turbine cover for Dolphin Diagnostic 2001 pool cleaner
SKU:9995070
Delivery: 3 to 7 business days
12,40 €Unit price /Sold outDolphin
Power supply for Dolphin Superkleen pool cleaner
SKU:9995673-ASSY
Available to order
143,80 €Unit price /Sold outDolphin
Combined rear brush for Dolphin pool cleaners
SKU:99955382-ASSY
Delivery: 3 to 7 business days
62,77 €Unit price /Sold out
Preguntas frecuentes sobre DOLPHIN XT SERIES
What pool surface area and length does the Dolphin XT Series cover?
The Dolphin XT Series is designed to effectively clean residential pools up to 12 meters long. Its 15- to 18-meter power cable with a swivel system prevents twisting and allows it to cover in-ground or above-ground pools with rigid walls.
The unit operates at a constant suction flow rate of 15 cubic meters per hour and adapts to various pool types:
- Rectangular or freeform pools up to 12x6 meters.
- Flat bottoms, gentle slopes, or hopper-style drops with à carrelage, liner, or polyester finishes.
- Beach areas and Roman-entry steps with gradual access.
Its hydrodynamic design ensures a firm grip without relying on the main filtration pump.
I have a à carrelage pool with resistant algae and I'm not sure whether this model will clean the waterline. Is it powerful enough?
The Dolphin XT Series features an active front brush that spins at twice the speed of the pool cleaner's drive system to remove embedded biofilm. This intensive mechanical action loosens organic and mineral buildup from the à carrelage joints before vacuuming it into the internal compartment.
To prevent recurrences during the cycle, it is advisable to monitor chemical levels using a Scuba II pool photometer to ensure balanced chlorine and pH levels. The combination of tracked traction and navigation software makes it easier to climb vertically and steadily up to the skimmer level.
How does the XT series filtration system work compared with conventional filters?
The XT series replaces conventional fabric bags with a top-access Easy-Clean basket featuring modular 50-micron and 100-micron panels. This setup lets you switch between ultrafine filtration for dust in summer and coarse filtration for organic debris after spring storms.
Unlike manual pool cleaners connected to the suction system, which overload the sand filter, the robot traps impurities independently. This reduces how often the filtration system needs backwashing, saving hundreds of liters of water each season.
I have children and pets at home. Is it safe to leave the pool cleaner connected in the water while we swim?
Maytronics pool cleaners run on very low-voltage direct current through a sealed transformer with IP54 insulation, which converts household current to 24 volts. This specification ensures complete electrical safety in the water.
However, European safety regulations recommend removing the equipment and its cable during swimming hours to eliminate the risk of tripping or entanglement. If you need to reinforce passive protection around the pool when the robot has finished its task, an Aqualarm Pool Alarm provides an immediate acoustic alert if anyone accidentally enters the water unsupervised.
What preventive maintenance does the pool cleaner require after each cycle?
The equipment’s preventive maintenance routine takes less than five minutes after the two-hour cycle automatically ends. Following these guidelines extends the service life of the mechanical components and sealed bearings:
- Remove the top basket by pressing the front latch and rinse the panels with a hose without excessive pressure.
- Visually inspect the upper impeller to make sure no hair or twigs are wrapped around it.
- Unwind the floating cable and store it extended in the shade, avoiding tight bends.
- Store the robot on a rigid stand or cart to prevent the rubber tracks from deforming.
Keeping the tracks off the hot ground preserves the traction needed to climb walls.
A lot of fine dust accumulates on the bottom, and the robot stirs it up without trapping it. What adjustment should I make?
Fine particles escaping during cleaning can be addressed by installing the 50-micron panels in the Easy-Clean basket and checking that the water is free of colloidal turbidity. When microscopic particles are smaller than 30 microns, they remain suspended due to the suction movement.
In these cases of cloudy water, applying a pre-treatment with ULTRA CLEAR Super Clarifier, 1 L. PM-643. Piscimar. clumps suspended impurities into dense flakes. Once they settle on the bottom, the Dolphin cleanly vacuums them up on its next pass without returning residue to the water column.
Comparing a hydraulic suction pool cleaner with the Dolphin XT Series, which has lower operating costs?
A Dolphin XT Series pool cleaner consumes approximately 150 watts per hour, compared with the more than 750 watts required by the 1 HP circulation pump needed to operate a hydraulic pool cleaner. This difference reduces electricity costs by more than 75% during the peak-use season.
In addition to direct consumption, Maytronics’ electric model protects the main filter sand and the pump’s pre-filter by trapping twigs and gravel in its internal basket. The initial investment pays for itself through reduced wear on the filtration motor and fewer water top-ups.