

![]() |
(+34) 951 97 45 60 |
![]() |
(+34) 637 09 41 39 |
info@piscinasyproductos.com |
Slide in polyester and light blue fiberglass. Rungs in polypropylene + FV. Stainless railings. Hydraulic installation included to facilitate sliding. Supplied with anchors.
Buy safe online. We offer secure SSL payments. Use Visa / Mastercard / Paypal
We work directly with the manufacturer, without intermediaries.
Regulated by current legislation in case of break, shipping or unhappy customer.
Slide in polyester and light blue fiberglass. Rungs in polypropylene + FV. Stainless railings. Hydraulic installation included to facilitate sliding. Supplied with anchors.
The slides are made of polyester resin and fiberglass, they stand out for their robustness and their great mechanical resistance to UV rays from the sun, as well as to atmospheric agents, thus ensuring a long life while maintaining good visual aesthetics.
Mounting
For a simple assembly, follow the following steps and you will have no doubts about the assembly of your Astralpool Straight Slide 1.80 cm.
1. Fit the rail (2) with the (3). Figure 1.
![]() |
2. Attach the track (1) to the railings (2-3) using the M8 bolts, nuts and washers (4). Figure 2.
![]() |
3. Insert the handrails (2-3) into the corresponding seats, fixing them with the M8 screws, nuts and washers (5). Figure 3.
![]() |
4. Assemble the rungs (6),(6a),(6b) using the M8 screws, nuts and washers (7), (7a), (7b).
5. Place the slide in its final location, mark the fixing holes on the ground, remove the slide and drill the holes for anchoring the plugs (8). To finish, place the discs (11) under the railings (2) and fix the slide using the self-tapping screws (9) and (10).
6. Connect the valve inlet Ø 10 mm. to a water intake. Figure 4.