Astralpool Straight Slide 1.80 mtrs.

Polyester and light blue FV slide. Steps in polypropylene + FV. Stainless railings. Hydraulic installation included to facilitate sliding. Supplied with anchors.

The slides are made of polyester resin and fiberglass, they stand out for their robustness and great mechanical resistance to the sun's UV rays, as well as atmospheric agents, thus ensuring a long life while maintaining good visual aesthetics.

Assembly

For a simple assembly, follow the following steps and you will not have any doubts about the assembly of your Astralpool Straight Slide 1.80 cm.

1. Fit the handrail (2) with that (3). Figure 1.

2. Join the track (1) with the handrails (2-3) using the M8 screws, nuts and washers (4). Figure 2.

3. Insert the handrails (2-3) into the corresponding seats, securing them with the M8 screws, nuts and washers (5). Figure 3.

4. Assemble the steps (6), (6a), (6b) using the M8 screws, nuts and washers (7), (7a), (7b).

5. Place the slide in its final location, mark the fixing holes on the floor, remove the slide and drill the holes to anchor the plugs (8). Finally, place the discs (11) under the handrails (2) and secure the slide using the self-tapping screws (9) and (10).

6. Connect the valve inlet Ø 10 mm. to a water intake. Figure 4.

• Positions 6a-6b correspond to the 1.70 m slide.
• Positions 7a-7b correspond to the 2 m slide.