Buy greenhouses for swimming pools

Home Chemicals Winterers

Preguntas frecuentes sobre Pool greenhouses

What is the best time to apply the pool winterizer and how does the water temperature influence it?

The ideal time to begin the wintering process is when the water temperature drops and remains below 15°C constantly. This is a crucial point, since at this temperature the activity of algae and bacteria is drastically reduced, allowing the pool winterizing product to be much more effective. If you apply the treatment too early (with the water still hot), its effect will not last and you may have to repeat the process before spring arrives. At Pools and Products we recommend:

Measure the temperature: Make sure your pool water is below 15°C.

Pre-cleaning: Before adding the product, the pool must be clean (bottom, walls and filter) and with the pH adjusted.

Initial dose: Apply the initial dose of the winterizing product following the manufacturer's specific instructions.

What steps should I take to properly prepare my pool before adding the pool winterizing product?

Before applying any product to winterize a pool, it is essential to clean and adjust the parameters to ensure that the treatment is 100% effective and the water remains crystal clear throughout the winter. Proper preparation of your pool at Pools and Products includes:

Thorough Cleaning: Remove all visible dirt, leaves and debris from the bottom and walls. It is also essential to thoroughly clean the filter (especially the sand filter, with a backwash if necessary).

pH Adjustment: The pH should be in the optimal range, generally between 7.2 and 7.6, to maximize the effectiveness of the winterizer. Use pH regulators if necessary.

Shock chlorination: It is recommended to perform superchlorination before applying the winterizer to completely disinfect the water and eliminate any microorganisms present.

Circulation: Keep the filtration system running after applying the shock chlorine so that it is distributed evenly.

What specific function does the pool winterizer have and why is chlorine alone not enough?

The pool winterizer is a chemical product specifically designed to protect the water and structure of your pool during the winter period of inactivity, which can last several months. Its main function is to inhibit the growth of algae, bacteria and prevent the formation of calcareous scale (lime). Unlike chlorine, the pool winterizing product acts slowly and has a prolonged effect:

Algae Prevention: Contains agents that prevent the proliferation of algae and fungi, which are very difficult to eradicate once they have established themselves.

Anti-lime protection: Prevents lime and other minerals from adhering to the walls, liner or pipe, minimizing stains and damage.

Savings in spring: By keeping the water in good condition, it saves you the task of having to empty and refill the pool or perform very aggressive shock treatments at the beginning of the swimming season.

How often should I apply the winterizing product for swimming pools during the winter season?

The frequency of application of the winterizing product for swimming pools will depend on the manufacturer's recommendations and the climatic conditions in your area. Generally, at Pools and Products, we suggest an initial shock treatment at the beginning of wintering, followed by periodic maintenance:

Initial application: It is the most important dose and is applied after cleaning and pH adjustment (around 2 to 2.5 liters per 50m³ of water).

Winter maintenance: It is recommended to repeat the wintering dose every 2 or 3 months throughout the winter. This ensures that the product concentration remains optimal and continues to protect the water until the next season.

Protective cover: If you use a suitable winter cover, the evaporation of the product is reduced, which helps prolong its effectiveness.

Do pool winterizers work the same in all types of pools (liner, tile, above ground)?

Yes, the pool winterizers that we offer at Piscinas y Productos are formulated to be compatible with the vast majority of pool surfaces, including tile, polyester, concrete and pools with liners. The objective of the pool winterizing product is to protect both the water and the lining material from scale and stains. However, if you have a pool made of a specific material, such as removable pools, you should always check the greenhouse manufacturer's instructions to ensure maximum compatibility.

In addition to the winterizer, is it necessary to use a cover or blanket to complete the wintering process?

Although the winterizing product for pools is essential for the chemistry of the water, the use of a winter cover is highly recommended and complements the chemical treatment. The combination of both offers maximum protection:

Debris Blocking: A cover prevents falling leaves, dust and other organic debris that could decompose and contaminate the water, reducing the effectiveness of the greenhouse.

Light reduction: Prevents the passage of sunlight, which is essential to completely stop the development of algae, which need light to grow.

Physical protection: Helps prevent damage caused by frost or strong winds, especially important if you live in cold areas.

What happens if I do not apply the pool winterizing product during the winter?

Skipping the use of the pool winterizing product during the cold months can have serious consequences, resulting in much greater effort and expense when spring arrives. The main complications that we try to avoid are:

Algae Bloom: The water will quickly turn green and fill with algae and other microorganisms.

Dirty and opaque water: The water will lose quality and clarity.

Damage to the structure: Without a pool winterizing product, the chances of limescale on walls and pipes increase, which may require expensive and difficult to apply descaling products.

Greater chemical consumption: Start-up in spring will be much more expensive, requiring large quantities of shock chlorine and other products to recover water quality.

Should I empty the pool partially or completely when using the product to winterize the pool?

Generally, it is neither necessary nor advisable to empty the pool completely. In fact, emptying it can be harmful, as the water pressure helps keep the structure firm, especially in in-ground or semi-inground pools. We recommend:

Water Level: Lower the water level to just below the return nozzles and skimmer. This is key to protecting the filtration system and pipes from frost.

Chemical treatment: Apply the pool winterizer with the remaining water.

Advantages of filling: Keeping the pool full prevents possible structural damage caused by the external pressure of the ground or land movements.

Can I use a pool greenhouse if I have a salt chlorination system?

Yes, most pool greenhouses are compatible with salt chlorination systems. However, it is essential that, as with any pool, you unplug and turn off the salt chlorinator and adjust the pH and chlorine levels before applying the pool winterizing product. The winterizer will act as a long-term algaecide and bacteriostatic, maintaining water quality while the salt chlorinator is out of service.

Is it safe to store the pool winterizer product at home and what precautions should I take?

The winterizing product for swimming pools is a chemical that must be handled with caution, always following safety guidelines. For safe storage of the pool conservatory in your home:

Storage location: Store the product in a cool, dry and well-ventilated place, away from direct sunlight.

Keep out of reach: It is crucial to store it in a safe, closed place, inaccessible to children and pets.

Do not mix: Never mix concentrated pool winterizing product with other chemicals, especially chlorine, as this could cause dangerous reactions.

Are you from the Canary Islands, Ceuta, or Melilla?

Pool greenhouses