Pool filters

The Vesuvio range is wide to reach both the public and private pool sectors. Filters manufactured with simultaneous projection of serine and fiberglass.

Filter laminated in polyester and fiberglass. Gray colour, polypropylene foot, new cover without screws, plug for draining water, pressure gauge and side selector valve. Maximum working pressure 2.5 kg/cm². max speed filtration 50 m³/h/m².

Your pool water will be extremely clear thanks to this booster cartridge filter. It is installed at the outlet of any sand filter.

Gre brand cartridge filter for above ground pool. Cartridge for any Gre AR125, AR124 or AR118 model filter.

Filter made of plastic material in one piece and without joints by means of the blowing process. The opening of the filter cover is carried out by means of a strap system. It is equipped with a built-in pressure gauge and manual air/water bleed. Selector valve included.

Made of plastic material in one piece without joints by blowing process.

Filter for pool model Cantabric Ø 400 mm., from the manufacturer Astralpool.

Buried shed injected in fiberglass reinforced polymer. Ref. 41910

This filtration kit is special for above ground pools with a standard blower filter made in the USA, it is made up of 6 valves in the head position and a pump with a two-year warranty.

Multicyclone 12 centrifugal prefilter. Waterco brand.

• Significantly reduces maintenance on your pool filter.

• Provides significant water savings.

• It does not have a filter element that needs to be cleaned or replaced.

• easy to mount in new or old installations.

Improve your pool water quality with easier and less frequent maintenance of your pool.

Filter with a glossy satin finish, with dust protection by means of a "flash" of transparent polyurethane varnish. Cover Ø 400 mm, injected. Equipped with manual air and water purge and pressure gauge and side selector valve. max speed filtration 50 m3/h/m2.

Filter with a glossy satin finish, with dust protection by means of a "flash" of transparent polyurethane varnish. Cover Ø 400 mm, injected. Equipped with manual air and water purge and pressure gauge and side selector valve. max speed filtration 50 m3/h/m2.

Filter with a glossy satin finish, with dust protection by means of a "flash" of transparent polyurethane varnish. Cover Ø 400 mm, injected. Equipped with manual air and water purge and pressure gauge and side selector valve. max speed filtration 50 m3/h/m2.

Filter injected in technical plastics. Ivory color. Union of the upper and lower part of the filter by thermal welding. Equipped with pressure gauge, manual water and air purges. Side selector valve included.