TECNOCLOR LIQUID FLOCULANT 5 L.

The Tecnoclor flocculant It is a highly effective liquid product for the treatment of swimming pool water. Its formulation based on flocculating polymers agglomerates fine suspended particles (dust, pollen, organic remains and colloids) that the filter alone is not capable of retaining. The result is a visible clarity improvement and the shine of the water, reducing the consumption of disinfectant and the filtration time necessary to keep the pool in perfect condition.

It is indicated for both specific recoveries (cloudy water after storms, parties or a chemical imbalance) as to preventive maintenance weekly in season. It is compatible with systems salt chlorination, chlorine, bromine and most automatic regulations, as long as it is dosed following good practices.

 

 

• Fast action: It groups micro-particles that cloud the water and facilitates its retention or decantation.
  
  
• Brighter water: improves transparency and the feeling of visual cleanliness.
  
  
• Savings: By removing suspended matter, the performance of the disinfectant is optimized.
  
  
• Flexible use: Valid for shock treatments or regular dosing.

How to use Tecnoclor liquid flocculant (cloudy water recovery):
1) Adjust the pH between 7.2 and 7.6.
2) With the pump running, distribute the recommended dose around the entire perimeter or pour slowly into the skimmer.
3) Maintain recirculation for 15–30 min for a homogeneous mixture and stop the leak for 6–12 hours to settle.
4) Vacuum to the drain sediments from the bottom and perform a filter wash.
5) Reset the filtration and check the parameters.

Indicative doses: maintenance: 5–10 ml per m³ once a week. Very cloudy water: 0.5–1 L per 100 m³. Adjust according to volume, bath load and filter performance. Avoid overdose (it may temporarily make the water milky).

Compatibility and precautions: product suitable for sand/glass filters. In cartridge or diatom filters, use very low doses or a clarifier specific and consult the filter manufacturer's instructions. Do not mix directly with other chemicals; Always add the products separately and with the pump running. Handle with gloves and glasses, avoid contact with skin and eyes, and do not ingest.

Storage: Keep the container tightly closed, in a cool, ventilated place, protected from the sun and frost. Consult the Quimifloc PS label for complete instructions and safety before use.

For more detailed information, consult the technical sheet that can be found in the "Attachments" tab.