AstralPool DR4000 digital programmable thermostat
AstralPool DR4000 digital programmable thermostat is backordered and will ship as soon as it is back in stock.
Transit time 3 - 5 days
Description
Description
With the new programmable and digital thermostat DR4000 from AstralPool you can perform the stop and start maneuver of a contactor.
The thermostat is indicated for all applications that require temperature control with optical precision.
Technical characteristics.
- Decimal point selectable through a 4-digit double display parameter + sign.
- 1 analog input.
- TTL port for connection to Copy Card.
- 2 configurable digital outputs of 1 SPDT 3A 250-.
- Consumption of 4 W max.
- It has two types of power:
- 90...240 Va±10% 50/60Hz.
- 12...24 Va / 12...36 Vc ±10% 50/60Hz.
- Dimensions: 70x85x61 mm.
Programming
To program the AstralPool digital programmable thermostat, you must follow the following steps
The programming menu contains all the necessary parameters to correctly configure the operation of the instrument and has two types of display levels: a user level and an installer level.
First we will press the key "SET" from the home screen for 3 seconds to be able to correctly access the parameter programming menu, then the USEr label corresponding to the user level of the menu can be displayed.
User level access (USEr)
While the USEr label is displayed press and release the key "SET" to be able to access the user level parameter folders.
Installer level access (INST)
While the label is displayed "USER" we press the key "UP" and "DOWN" To open the INST label which allows you to access the installer level parameter folders, while viewing the INST label press and release the "SET" key.
How to modify the value of parameters at different levels.
To modify the value of the parameters we use the keys "UP" and "DOWN" to cycle through the user level folders by pressing the "SET" key to access the parameters of the selected folder.
Once the key is pressed "SET" In correspondence of ALAr, the first parameter of the folder will first be displayed as indicated below:
- PV display: Parameter label (PAO).
- SV display: Current value of the parameter (O).
Pressing the key "SET" you will be able to cycle through all types of parameters in the folder.
To modify the value of the displayed parameter, use the keys "UP" and "DOWN", when finishing configuring the parameter according to the desired value, we proceed to press "FNC" or we wait for the maximum time to be able to memorize said value.
Later we press and release the key "FNC" in order to return to the higher viewing levels.
