Loading...
AstralPool 2" thread whirlpool jet
AstralPool
| SKU:
33586
34,82 €
Unit price
/
Unavailable
Tax included, shipping and discounts calculated at checkout.
AstralPool 's 2" threaded hydromassage jet is an accessory that can be installed on water + air jets in hydromassage spas. It has a water inlet diameter of 50 mm and an air inlet diameter of 32 mm.
AstralPool 2" thread whirlpool jet is backordered and will ship as soon as it is back in stock.
Transit time 3 - 5 days
Description
Description
AstralPool's 2" threaded whirlpool jet is an accessory that can be installed on water + air jets in whirlpool spas. It has a water inlet diameter of 50 mm and an air inlet diameter of 32 mm.
The combination of pressurized water jets with air bubbles creating intense and relaxing hydromassage effects.
It has a flow rate of 4 m³/h and a pressure of 0.8 bar.
Installation
To carry out a correct and simple installation of the AstralPool 2" threaded hydromassage jet, we must follow the following simple and quick steps.
- Mark a point approximately 200 mm below the normal water level on the Spa wall (no. 1).
- Once the point in the center has been made, we drill with a drill bit first and then with a Ø 60-75 cup burr so that it passes through the nozzle body. (no. 2).
- We glue the supplied plug to the body of the Jet (no. 3).
- If you want a greater acceleration of the water at its exit, you can place one of the 3 supplied bushings (no. 4) inside the choke.
- Place the Jet body on the back of the Spa wall and thread the nozzle on the front, placing a flat gasket on both sides of the Spa wall. (No. 5 and 6).
