Gre PP076 3/4 HP self-priming pool pump

PP076 ¾ CV self-priming pool pump to increase the flow performance required in your pool filtration systems. Gre self-priming pool pumps are single-stage, self-priming centrifugal pumps designed for use in this type of equipment.

They have a maximum flow rate and low noise, they go hand in hand to fully satisfy the demands of the private pool with an attractive design.

Manufactured with high quality materials subject to hydraulic and electrical controls.

Following the instructions in the manual you will obtain a correct installation without any problem.

Features techniques

Installation

• You must install your pump horizontally, fixing it with screws to the support, thus avoiding vibrations and annoying noises.
• The pump must be installed in a place away from any corrosive or flammable product.
• The pump must have sufficient drainage to avoid the risk of flooding and must be protected from excess humidity.
• Provide valves independent of the water inlet and outlet.
• Provide sufficient access for pump maintenance, ensuring that the pump technical data label is visible.
• Mount the pump below the water level of the pool or pond for best performance.
• Make sure the pump is safe from possible flooding and receives proper dry ventilation.
• During installation, position the pump to have a free space of 1 m around it.

Measurements