1.5" side selector valve with link to filter

Selector valve incorporates as its main innovation, reduced dimensions thanks to the single-level design (compared to the usual two levels in selector valves). This smaller size makes it especially suitable for those applications where space is limited, such as sheds or monoblocs, where the greater use of the Top model is notable.

Features

• The application of the Flat valve is recommended for filters up to 550 mm in diameter or with comparable pressure loss levels.
• Allowing you to perform the same functions as a conventional valve: filtration, washing, rinsing, emptying, recirculation and closing.
• 6 work positions.
• Maximum working pressure 2.5 kg/cm2.
• Body, cover and handle in AISI-316.
• The design of the distributor prevents possible blockages caused by sand, dirt, etc.
• Maximum mechanical and corrosion resistance.

Installation

Screw the sleeve (1) to the selector valve in the mouth marked TOP, placing the flat bottom gasket (3) and inserting the nut (2) according to figure 1.

Attach the valve to the upper outlet of the filter, gently threading the nut (2), so that the valve can rotate on the axis of the nut according to figure 2.

Proceed to align the valve over the filter outlets by mounting the elbow (5) and the nut (6) according to figure 3.

Gently screw on the nut (6) and firmly tighten the nut (2) according to figure 4.

Dimension