Standard Asymmetrical Ladder 5 steps. Aquarama

Standard Asymmetrical 5-step ladder made of AISI 304 stainless steel with a shiny polished finish and 43 mm tube, AISI 304 stainless steel steps, thanks to its careful design, guarantee greater safety against all types of sliding and cutting. They are supplied with a fixing anchor provided for connection to the ground. Thanks to its simple installation, you will not have any problems when it comes to assembly.

Measurements

Maintenance tips for stainless steel, for aquatic applications.

* Carry out a strict initial visual inspection to detect the possible appearance of signs of oxidation due to external agents that were not initially considered.

* Strict compliance with the periodic manual cleaning of the accessories, starting with a weekly frequency, until the optimal time interval is adjusted, always avoiding the formation of dry residue deposits (salts or other types of solids).

*For manual or shock dosing, do not do it near stainless parts, avoid splashes or concentrations.

*Avoid deposits of substances on the metal parts such as: salts, dust, dirt, etc.

*Avoid contact with other metal parts or materials, especially iron, concrete adhesions, etc.

*Clean the accessories with tap water or if deposits or rust stains are observed; Clean with 10-15% diluted nitric solution, or non-abrasive metal cleaner, rinse with fresh water and dry completely with a cotton cloth.

*Special attention to the interstitial areas and the effects of the waterline of the accessories.

*If salts are added or an electrolysis system is used, maintain strict control of the amount of salts dissolved in the water and the stability of the equipment.

*Ensure control of pH, disinfectant and correct use of bactericide.

*Perform daily water recirculation to prevent the formation of deposits in submerged accessories.

*Ensure correct daily air recirculation, using dehumidifying equipment to control the formation of condensation in the environment. In installations where there are podiums or jumping levers, special attention must be paid to cleaning the lower part of them, in order to prevent accumulated condensation.

*Prevent at least one annual technical stop for preventive or corrective maintenance of accessories and the installation in general.

*Remember as a fundamental conservation premise for stainless steel, that the smoother and cleaner we keep its surface, the more stable the resistance to oxidation will be.