Ladder for overflow 3 steps. Astralpool.

As a novelty, it incorporates the curvature with a variable radius in the grip section, giving a more modern and attractive appearance. 500 mm wide steps, equipped with an upper safety step, and manufactured according to European standards EN 13451-1 and EN 13451-2. Easy installation. Handrail Ø 43 mm x 1.5 mm, with steps in AISI-316 stainless steel with a bright polished finish. They have anchors provided for connection to the equipotential circuit. They do not allow mounting on anchors codes 00043, 08727, 07331, 18243.

Measurements:

Maintenance tips for stainless steel, for aquatic applications.

* Carry out a strict initial visual inspection to detect the possible appearance of signs of oxidation due to external agents that were not initially considered.

* Strict compliance with the periodic manual cleaning of the accessories, starting with a weekly frequency, until the optimal time interval is adjusted, always avoiding the formation of dry residue deposits (salts or other types of solids).

*For manual or shock dosing, do not do it near stainless parts, avoid splashes or concentrations.

*Avoid deposits of substances on the metal parts such as: salts, dust, dirt, etc.

*Avoid contact with other metal parts or materials, especially iron, concrete adhesions, etc.

*Clean the accessories with tap water or if deposits or rust stains are observed; Clean with 10-15% diluted nitric solution, or non-abrasive metal cleaner, rinse with fresh water and dry completely with a cotton cloth.

*Special attention to the interstitial areas and the effects of the waterline of the accessories.

*If salts are added or an electrolysis system is used, maintain strict control of the amount of salts dissolved in the water and the stability of the equipment.

*Ensure control of pH, disinfectant and correct use of bactericide.

*Perform daily water recirculation to prevent the formation of deposits in submerged accessories.

*Ensure correct daily air recirculation, using dehumidifying equipment to control the formation of condensation in the environment. In installations where there are podiums or jumping levers, special attention must be paid to cleaning the lower part of them, in order to prevent accumulated condensation.

*Prevent at least one annual technical stop for preventive or corrective maintenance of accessories and the installation in general.

*Remember as a fundamental conservation premise for stainless steel, that the smoother and cleaner we keep its surface, the more stable the resistance to oxidation will be.