Phosphate remover CTX-1596 PhosFree, 1 L.

CTX-1596 PhosFree Phosphate Remover is specially formulated for the removal of excess phosphates from pool water.

It has the potential to remove phosphates from chemicals, fertilizers, cleaning products and other contaminants.

It is also fully compatible with most of the most common disinfection treatments in swimming pools.

It has been proven that the use of these products significantly improves the performance of salt chlorination equipment.

INSTRUCTIONS FOR USE:

• Hold the bottle upside down so that the dispensing chamber can be filled.
• Unscrew the bottle cap.
• Empty the dosing chamber.
• For a specific volume, tilt the bottle and determine the desired dose.

DOSAGE:

• Initial treatment for pools with high phosphate levels:

• Test the pool water for phosphate levels using a phosphate kit.
• Clean the filter.
• Calculate the amount of product needed, pouring the dose of product directly into the pool glass, spread over the surface.
• Keep the filtration system running for at least 24 hours. (If the filter pressure increases noticeably, clean it.
• After 48 hours, retest the water for phosphates. If necessary repeat the treatment.

The use of PhosFree may cause cloudiness to the pool water in the initial phase. This is normal and indicates that the product is working correctly, it will disappear in a few minutes.

• Maintenance treatment:

• With the filtration equipment in operation, add 60 ml. of product per 50 m³ of water each week, to keep phosphate levels below 125 ppb.
• This dose is indicative in nature and can be modified depending on the characteristics of each pool, weather, etc.