GRE HPGIC75 Full Inverter Heat Pump

The heat pump is a highly efficient and economical heating system designed to heat pool water.

This device uses outside air as a source of energy, transforming it into heat through a thermodynamic cycle.

The heat pump works through a thermodynamic cycle that involves the transfer of heat from an outside source (in this case, ambient air) to the pool water.

The process is carried out in several steps:

1. Evaporation: The heat pump contains a refrigerant that, at low pressure, absorbs heat from the outside air. This refrigerant, in a liquid state, evaporates when absorbing heat, turning into vapor.

2. Compression: The refrigerant vapor is drawn into a compressor, where it is compressed. This increase in pressure raises the temperature of the steam, transforming it into a hot, high-pressure gas.

3. Condensation: The hot gas is directed to a heat exchanger, where it transfers its heat to the pool water. As heat is lost, the refrigerant condenses again, returning to its liquid state.

4. Expansion: The liquid refrigerant passes through an expansion valve, where its pressure is reduced. This process causes the refrigerant to cool and re-enter the evaporator, restarting the cycle.

Through this continuous cycle, the heat pump can extract heat from the outside air, even in cold conditions, and transfer it to the pool water, providing an efficient and sustainable solution for your heating.

To optimize its performance, it is essential that it be connected to a by-pass kit, which allows the circulation of bypass water to the pump.

Like other heating systems, heat pumps are installed after the filtration system, ensuring proper water flow.

The GRE HPGIC heat pump series consists of four models, each equipped with a winter protection cover, ensuring its integrity during non-use seasons.

FULL INVERTER TECHNOLOGY

• Very economical solution thanks to Full Inverter technology, which allows optimizing the energy consumption of the heat pump.
• It offers three operating modes: Boost mode for a rapid increase in temperature, Smart mode to increase power automatically and finally Ecosilence mode with reduced power to save more energy and emit a lower noise level.

INTEGRATED CONNECTIVITY

• Thanks to the Fluidra Pool® application and its intuitive interface, the heat pump functions can be adjusted and consulted remotely from anywhere and at any time with a smartphone.

EXTENSION OF THE BATHING SEASON

• Allows you to use the pool for longer thanks to the fact that it can be used with an outside ambient temperature of up to -7 ºC