Jolly Water Clarifying Gel

The Jolly Gel flocculant clarifying gel for pools eliminates phosphates and the smallest dirt particles from the pool water, achieving extreme water clarity in just a few hours.

The product can be used in sand, glass and zeolite filters. It should not be used in cartridge filters or filter cotton balls.

It comes in a box with four blocks of gel that must be placed in the pre-filter basket of the circulator pump. These cubes will slowly dissolve as the water passes over them, creating a transparent glutinous membrane on the surface of the filter medium, penetrating the bed to a depth of approximately 15 cm. This glutinous structure will collect the finest dust particles along with the algae spores.

Subsequently, you will only have to backwash the filter when necessary, eliminating the residue through the filter drain.

DOSAGE AND USE:

Use a gel block for pools between 20 and 60 m³. Do not place chlorine tablets near the gel.

The first time you use Jolly Gel you should check the pH of the water and adjust it between 7.2 and 7.6. It is very important that the user controls the working pressure of the filter during the first six hours after application, since the product will retain a large amount of dirt that will increase that pressure. Once the product has worked, you must wash the filter and continue with your usual treatment. However, the product can continue working for up to 3 weeks.