Cell electrode 30 g/h. for CTX Go Salt chlorinators
Cell electrode 30 g/h. for CTX Go Salt chlorinators is backordered and will ship as soon as it is back in stock.
Transit time 3 - 5 days
Description
Description
The replacement electrode/cell Ref. 70329 Replenishes the chlorination capacity in electrolysis equipment whose performance has dropped due to wear. with 11 plates, is oriented to a nominal production of 30 g/hr, helping to keep water clear and disinfected with less need for chemical corrections.
If you notice low production, cell-depleted warnings, or fluctuations in the disinfectant despite having the pH adjusted, replacing the cell is usually the most effective measure. The operation is simple: cuts power and flow, loosens connections (one 13mm open end wrench is usually enough), remove the old cell and place the new one respecting the assembly direction. Take the opportunity to clean the cell holder cup and check the seals before resuming service.
The image may not match exactly the supplied cell depending on the manufacturer's version. Check below the compatible equipment and always check the exact reference of your chlorinator.
Compatible chlorinator equipment:
| Reference | Model | Reference | Model | Reference | Model |
|---|---|---|---|---|---|
| 70289 | CTX Go Salt 30g | 70299 | CTX Go Salt pH 30 g | 72569 | CTX Sprint Chlore V2 |
| 74082 | Astralpool E-Next 12 |
| Reference | Model |
|---|---|
| 70289 | CTX Go Salt 30g |
| 70299 | CTX Go Salt pH 30 g |
| 72569 | CTX Sprint Chlore V2 |
| 74082 | Astralpool E-Next 12 |
On mobiles, this table is displayed in 2 columns (Reference and Model).
