Cell electrode 21 g/h. for CTX Go Salt and GRE chlorinators

The replacement electrode/cell What we propose is the direct solution to recover the performance of your chlorinator when the original cell has lost effectiveness due to wear. With use, the plates reduce their activity and chlorine production decreases, which translates into cloudy water, more chemical instability and greater consumption of corrective products. By replacing the cell with this spare part, the equipment works again in its nominal range and it is much easier to keep the water clear and disinfected daily.

This replacement is designed for residential installations looking for a stable and predictable chlorination. Its design with 7 plates favors a production of 21 g/hr (depending on the chlorinator), and its construction with materials resistant to the saline environment helps to prolong the useful life of the set. If you notice a drop in production, cell-depleted warnings, or that the disinfectant fluctuates for no apparent reason despite having the pH adjusted, changing the electrode is usually the most effective action to restore balance.

The installation It is simple and can be done by the user himself: cut off the feed and flow, loosen the connections (one 13mm open end wrench is usually sufficient), remove the old cell and place the new one in the same assembly direction. Take the opportunity to review the status of gaskets and cell holder cup, remove possible scale and bleed the air before starting up. After changing, respect the chlorinator manufacturer's instructions (salinity, flow rate and filtration times) to ensure optimal operation.

Below you will find the compatibility table with the most common equipment for this cell. If your model does not appear, contact us with the exact reference of the chlorinator to identify the correct replacement.