Sena ½ HP pump - 7800 l/h single-phase
Sena ½ HP pump - 7800 l/h single-phase is backordered and will ship as soon as it is back in stock.
Transit time 3 - 5 days
Description
Description
There are other variants of the product available:
This product has different models. You can select another model by clicking on any of the references in the table below:
| Reference | Model |
| 25461 | Sena 1/3 HP pump - 7,000 l/h single-phase |
| 25462 | Sena ½ HP pump - 7,800 l/h single-phase |
| 25463 | Sena ¾ CV pump - 10,400 l/h single-phase |
| 25465 | Sena 1 HP pump - 12,800 l/h single-phase |
| 25467 | Sena pump 1.25 HP - 14,000 l/h single-phase |
Design and great features
In the Sena family of pumps, both maximum flow and low noise go hand in hand with the intention of fully satisfying the demands of the private pool and with an attractive design that is already characteristic of AstralPool. It is worth highlighting its self-suction capacity, above 2 m without a foot valve. In addition, Sena pumps are made of technical plastics with a 2 liter capacity prefilter and its transparent lid allows you to see the inside of the prefilter.
The Sena family is available from 1/3 HP to 1.25 HP with single-phase motors and from 3/4 HP to 1.25 HP in three-phase motors, allowing work at 230 V and 230/400 V with a variation of ± 10% with respect to the nominal voltage because they incorporate Eurovoltage motors.
Its features:
- Stainless steel pump hardware.
- Connection fittings for suction and delivery of 1.5" for Ø 50 mm sleeve.
- Mechanical seal manufactured in AISI 316.
- Wrap in NORYL.
- Pump body and diffuser made of polypropylene with mineral filler and fiberglass.
- Class F insulation and IP-55 motor protection allow them to work in environments with high humidity and high temperatures.
- Self-suction capacity above 2 m.
- Standard range at 50 Hz, also available at 60 Hz.
Low noise
Sena pumps work at full capacity with an optimal noise level for all models, so that the noise effects I perceive in the pool environment are minimized.
Practical design.
The entire range of Sena pumps incorporates a bayonet closure on its pre-filter cover, which allows the pump pre-filter to be closed in a single movement in four different positions. The cross configuration of the pre-filter cover allows you to use any tool to open or close it. Also, to fix the foot to the pump body, a foot with great stability and easy assembly has been chosen, eliminating screws as one of its components.
| Code | Power | CV | Voltage | Flow | Weight | Volume |
| 25461 | 0.23 kW | 1/3 CV | 230V | 7,000 l/h | 10,20 | 0.055 m³ |
| 25462 | 0.41 kW | ½ CV | 230V | 7,800 l/h | 10,20 | 0.055 m³ |
| 25463 | 0.56 kW | ¾ CV | 230V | 10,400 l/h | 11,65 | 0.055 m³ |
| 25465 | 0.63 kW | 1 hp | 230V | 12,800 l/h | 12,75 | 0.055 m³ |
| 25467 | 0.82 kW | 1.25 HP | 230V | 14,000 l/h | 13,75 | 0.055 m³ |
