Electrolysis + Hydrolysis + Ionization Aquascenic HD3. Sugar Valley. 11508

The new low salinity Electrolysis + Hydrolysis + Ionization equipment Aquascenic HD3 It uses three disinfection methods to obtain perfect sterilization of the water, without the need to add any chemical product.

Hydrolysis breaks the water molecule, thus generating oxygen-based disinfection agents (O³, O², OH...). Electrolysis uses the chlorides present in water (no need to add salt) to produce HClO (disinfectant). As a third disinfection system, it uses copper and silver ionization, producing an algaecide, bactericidal and flocculating effect to produce a residual disinfectant.

With the new Aquascenic HD3 low salinity Hydrolysis + Ionization + Electrolysis equipment you will have a comprehensive solution to treat water effectively.

Operation

We are going to explain the operating principles of the "AQUASCENIC" low salinity Electrolysis + Hydrolysis + Ionization equipment.

Low salinity hydrolysis and/or electrolysis.

Water is made up of 2 parts hydrogen and 1 part oxygen (H2O).
Hydrolysis etymologically means decomposition by water. Hydrolysis a process to generate hydrogen and oxygen through electricity and water.
When passing an electric current through water, the chemical bond is broken, negative charges or oxygen ions migrate to the positive electrode (anode). Hydrogen ions, which are positively charged, are attracted to the negative electrode (cathode). The decomposition that will occur will be the following:

Electrical energy +2 H²O → 2 H² + O²

This results in an extra negative element, since in the combination the number of electrons exceeds the protons by 1. It is now a single negatively charged hydroxide, or hydroxyl ion (OH -).
In Hydrolysis there are numerous secondary chemical reactions, which also produce ionic species with oxidizing and disinfectant power such as ozone (O²), monatomic oxygen (O1) and hydrogen peroxide (H²O²).
The electronic circuit of our electronic box transforms current (220 V, 50Hz) into direct current of low voltage and high amperage. This current will be supplied to titanium electrodes activated with noble metals placed in the water recirculation in a support specially designed for this purpose.
In these non-soluble electrodes, a combination of the most powerful existing oxidants is created for the disinfection of water, thus avoiding the use of chemicals.
If in this treatment we incorporate a small amount of salt between 1 and 2 grams of salt per liter of water, either due to lack of conductivity or because we want to generate a tangible residual, we will thus achieve that the same system will also generate a chlorine residual by salt electrolysis at a low concentration. The products decompose, act and are regenerated again. The residual disinfectant generated by electrolysis will not harm the eyes, skin or health of bathers.
You won't have to worry if your pool runs out of salt as the system would continue disinfecting in Hydrolysis mode.
The chlorine generated destroys the organic matter and pathogens present in the water, transforming it back into sodium chloride (common salt).

Ionization of copper (Cu) and silver (Ag).

The joint use of copper and silver, both with high disinfection capacities, greatly increases the effectiveness of each of our systems. If, in addition to that, in the case of cold water, it is supported by the presence of a third party that can be combined (chlorine), the disinfectant progression is geometric.
The addition of metals to water as disinfectants has been used for many years since Greek culture through the Middle Ages, even in America, during the colonization of the ancient west, a silver dollar was also placed in barrels of water. Currently, silver ions are added to common drinks such as beers, liquors and wines.

Oxidation Reactions.

The ion-producing reaction (at the anode)

Cu++ Cu²+ + 2e-

Ag++ Ag+ + 1e-

AQUASCENIC range technical characteristics

DESCRIPTION	HD 1	HD 2	HD 3
ELECTRONIC UNIT
Intensity	0 - 100 %
Salinity	from 1.5 g to 100 g. NaCl/l
m³ pool (< 28ºC)	65 m³	100 m³	200 m³
m³ pool (> 28ºC)	40 m³	80 m³	125 m³
Display	Removable 2.8" TFT full color for remote installation (12 languages)
Food	220V 50/60Hz
Exit	8-8A	8-15A	8-20A
Maximum consumption	80W	120W	160W
Dimensions	270 x 220 x 115mm
electronic unit	Black ABS fireproof plastic
Protection cap	Gray ABS plastic
Control	32 bit microprocessor
Intensity regulation	Amperage + Voltage
Ventilation	Heatsink
Self-cleaning	Programmable from 1 to 24 hours
Flow control	gas sensor		Flow sensor
Hour meter	Yes, accessible per client
Production control	from 0 to 100%
Alarms	Low conductivity / Lack of flow / pH dosing / Excessive pH out of range / Maximum pH dosing time
Salinity test	Detects g/l of salt (accuracy of +- 10%
Production control by cover	Configurable production level 0-100% depending on open or closed pool cover
Production by external signal	Configurable production level 0-100% depending on any external signal (second analog input)
Communications	MODBUS RS485 / WIFI / ETHERNET
Main control outputs	Filtration control / Lighting control / Heating control
Additional control outputs	4 additional user-configurable relay outputs
SALINE ELECTROLYSIS CELL
Saline electrolysis cell	5 titanium plates	7 titanium plates	10 titanium plates
Minimum flow	5 m³/h	9 m³/h	11 m³/h
Plate measurements	200 x 45mm	200 x 45mm	400 x 45mm
Cell support material	Transparent PVC plastic
Cell closure	Threaded for easy cell assembly
Pipe connection diameter	63mm
Cell cable	(3x4)x1.5m
gas sensor	Incorporated in cell		NO
Maximum pressure	4kg/cm²
Maximum temperature	45ºC
IONIZATION VESSEL
Number of electrodes	2	4	6
Dimensions (length/Ø)	177 x 141mm	280 x 141mm	400 x 141mm
Connection	Thread 2" (63 mm)
Glass material	transparent ABS
Electrodes Material	Electrolytic copper and silver