What causes murky water in the pool?
Immerse yourself in one crystalline pool and refresh you It is one of the greatest pleasures of summer. However, when the water becomes cloudy, it becomes unadlying and can completely take away the desire of that expected bath on the hottest days of summer.
¿What causes cloudy water in the pool? It is a common question among the owners of pools who have suffered it. From swimming pools and products we will reveal the possible Causes of turbidity of water and we tell you How to solve This inconvenience to enjoy a clear and transparent pool.
And prepare to enjoy your pool at any time!
Causes of murky water in a pool
Turbia water in the pool can be caused by several factors, and it is important to identify them to be able to put an adequate solution. These are some of the most common causes:
- He pool filtration system It is not working correctly or is not working enough time, so organic particles and matter remain in the water.
- A Incorrect pH can cause Pool treatment products Do not be effective, which can lead to the formation of suspended algae and particles that make water look cloudy.
- Yes chlorine levels In the pool they are low, bacteria and microorganisms can proliferate.
- The algae They can grow in pool water, especially when there is a combination of sunlight, high temperatures and unbalanced chemical levels.
- Finally, a High level of pool use, such as the entry of many people, or the presence of leaves, earth and other waste can contribute to the turbidity of the water.
Ideally, this problem does not take place in our pool. But if the case is given, once you identify the cause, it will be time to put the most appropriate solution.
Why is it important to solve it?
Solving the murky water of a pool is of vital importance for several reasons:
- Turbia water can hide bacteria, microorganisms and other pollutants that represent a risk to the health of bathers.
- The lack of clarity in water It makes visibility difficult, which can increase the danger of accidents and injuries inside the pool.
- Aesthetically is less appetizing Bathe in a murky water that in a pool with clean and transparent water, which is much more pleasant.
- When the water is cloudy, the Filtration and disinfection systems They can work in a way less efficient, which leads to greater wear and louder life of the equipment components. Solving turbidity ensures proper equipment operation and reduces long -term maintenance costs.
- In addition, murky and unbalanced water can contain substances that They damage the pool lining.
- When solving the turbidity of the water, Optimizes the use of chemicals and water waste is reduced. This is not only beneficial for the environment, but also helps keep the operating and maintenance costs of the pool.
Main steps to solve the murky water of the pool
Fortunately, they exist Simple solutions What can you apply to Solve the turbidity of your pool water and return its crystalline appearance. From swimming pools and products we tell you what are the main steps to follow:
Clean surface dirt
This will be the first step that you must carry out. Use a Pick up and others Pool manual cleaning products to remove leaves, insects and other waste that may be floating on the surface of the water. In addition, the bottom of the pool aspires to eliminate accumulated dirt.
Verify pH and chlorine levels
Make sure the pH is within the recommended range, usually between 7.2 and 7.6, and that chlorine levels are adequate. For this point one of our PH and chlorine analyzers cases.
Shock treatment
If chlorine and pH levels are outside the recommended values, it is necessary to perform a shock treatment. A shock treatment for pool is a Intensive process of disinfection and purification of water that is occasionally performed to quickly eliminate any accumulation of pollutants, bacteria and microorganisms that may have multiplied in the pool.
What to do if the pool water is still murky?
If you have followed all the previous recommendations and the pool water is still clear, you can perform the following tasks.
Clean the filters
When was the last time you thoroughly cleaned the filters? Maybe this was the first question you asked yourself by wanting to solve the problem of turbidity of the pool water. Filters play a crucial role in the elimination of particles and water dirt. Clean the filters and replace any clog or worn filter medium. In addition, if necessary, you can Increase filtration hours.
Use flocculant
If the water is still cloudy after the previous steps, you can Add a flocculant, which will help the particles suspended in the water grouped and deposit in the background, facilitating their elimination through aspiration.
Monitor and adjust
Once you have taken the previous steps, it is important regularly monitor PH and chlorine levels, and make adjustments as necessary. For this, you can use a Automatic pH and chlorine regulator.
In the event that the problem has not been solved after following all the recommended steps, you can contact a professional.
And remember that it is essential to maintain adequate maintenance and control of the pool to avoid the reappearance of turbidity in the water!