The 75W UV-C Ozone ultraviolet equipment for swimming pools breaks down tanning creams, cosmetic products, urine or sweat thanks to ozone, it will be effective immediately after you install your ultraviolet equipment. The water is then pumped into the unit through a reactor provided in the equipment, due to the pressure of the water in the reactor, air is exhaled through the venturi valve. The pressure is indicated by a manometer and can be adjusted by means of the ball valve. The air sucked into the unit through the pneumatic valve, through the space between the quartz tube and the UV-C ozone lamp, the air that is sucked enters the unit through the special UV-C lamp , the air is charged with ozone particles thus producing the lamp with a discharge of 0.6 grams of ozone.
Once past the ball valve and the air loaded with ozone is mixed with water in the reactor, here we will opt for the disinfection process.
Next, in the stainless steel casing, the water will be mixed with ozone and exposed to the effect of the 25 watts produced by the UV-C lamp. The lamp will have a double function and will simultaneously produce ozone and UV-C radiation, this unit is later responsible for completely eliminating all ozone particles in the water once its function has finished. All this happens because the ozone is mixed with water when it passes through the lamp a second time.
The 75W ultraviolet equipment for UV-C Ozone pools, the casing is made of 316 L stainless steel, ensuring an extra reflection of up to 35% of UV-C light. The device produces safe ozone at 100% of the outgoing water flow since it does not contain any more ozone, thus obtaining completely disinfected water free of bacteria and totally crystalline.
It is advisable to use a little chlorine since it is used for the pool, it is necessary to supply the time that your pool pump requires to fully pump the water in your pool, thus reducing the risk of new microorganisms developing.
Characteristic.
- Built-in electronic stabilizer to obtain a uniform current.
- Up to 35% more yield of UV-C radiation by reflection.
- Interior in 316 L stainless steel.
- The device itself will tell you when to replace the lamp.
- Simple installation and maintenance.
- It has a ground connection.
- 2 years warranty.
Technical characteristics.
capacity max. from the pool | 75,000 |
flow max. | 25,000 |
max pressure | 2 bars |
Device diameter | 72mm |
Device length | 100cm |
discharge diameter | 63mm |
Stainless steel | 316L |
electronic load | 230V AC 50/60Hz |
maximum current | 0.57AMP |
Lamp voltage (W) | 75W |
Wavelength | 253.7 |
Lamp voltage (V) | 97 |
lamp current | 0.80 AMP |
Output power 100h (W) | 25W |
µW/cm² at 1 meter | 144 |
lamp type | Van Erp Ozone Lamp 75W |
copper ionizer | - |
Ozone | 0.6g/h |
hour meter | Yes |
Lamp change alarm | Yes |
Dosing pump | - |
Flow switch | - |
chemical reduction | 90% |
Weight | 7.7kg |
packing size | 37 x 13 x 111cm |