Seine pump 1/3 hp - 7,000 l/h monophaseRef. 25461
Range of new generation pumps. With powers between 1/3 CV up to 1.25 CV in single-phase motors. The pump is single phase .
Buy safe online. We offer secure SSL payments. Use Visa / Mastercard / Paypal
We work directly with the manufacturer, without intermediaries.
Regulated by current legislation in case of break, shipping or unhappy customer.
Other product variants are available:
This product has different models. You can select another model by clicking on any of the references in the table below:
|25461||Sena pump 1/3 CV - 7,000 l/h single-phase|
|25462||Sena pump 1/2 CV - 7,800 l/h single-phase|
|25463||Sena pump 3/4 CV - 10,400 l/h single-phase|
|25465||Sena pump 1 CV - 12,800 l/h single-phase|
|25467||Sena pump 1.25 CV - 14,000 l/h single-phase|
Design and great features
In the Sena family of pumps, both maximum flow and low noise go hand in hand with the intention of fully satisfying the demands of private pools and with an attractive design that is already characteristic of AstralPool . It is worth mentioning its self-suction capacity, above 2 m without a foot valve. In addition, Sena pumps are made of technical plastics with a 2 liter capacity pre-filter and its transparent cover allows you to see the inside of the pre-filter.
The Sena family is available from 1/3 CV to 1.25 CV with single-phase motors and from 3/4 CV to 1.25 CV in three-phase motors, allowing to work at 230 V and 230/400 V with a variation of ± 10% with respect to at the nominal voltage due to the fact that they incorporate Eurovoltage motors.
- Pump screws in stainless steel.
- Connection raccords for suction and delivery of 1.5" for Ø 50 mm hose.
- Mechanical seal made of AISI 316.
- Impeller in NORYL.
- Pump body and diffuser made of polypropylene with mineral filler and fiberglass.
- Class F insulation and IP-55 motor protection, allows them to work in environments with high humidity and high temperatures.
- Self-suction capacity above 2 m.
- Standard range at 50 Hz, also available at 60 Hz.
Sena pumps work at full capacity with an optimal noise level for all models, so that the noise effects perceived in the pool environment are minimized.
The entire range of Sena pumps incorporates the bayonet lock on its pre-filter cover, which allows the pump's pre-filter to be closed in a single movement in four different positions. The cross configuration of the pre-filter lid allows the use of any tool to open or close it. Also, to fix the foot to the pump body, a foot of great stability and easy assembly has been chosen, eliminating the screws as one of its components.