Inverter heat pump GRE HPGI60
Ref. HPGI60• Variable speed inverter heat pump.
• For pools up to 60 m³.
• Low noise level, only 23-35/40-52 dB.
• Includes winter protection cover.
Buy safe online. We offer secure SSL payments. Use Visa / Mastercard / Paypal
We work directly with the manufacturer, without intermediaries.
Regulated by current legislation in case of break, shipping or unhappy customer.
The range of GRE Inverter HPGI heat pumps are capable of adapting their performance to the heating needs of your pool, thus providing significant energy savings, while maintaining an optimal coefficient of performance (COP) at all times.
They are an economical and very efficient heating system that allows us to heat the water in your pool by capturing heat from the air and passing it to the water. These equipment must be installed in by-pass so that the water circulates in bypass towards the heat pump.
They are outdoor installation units and always in the return pipe and after the filtration equipment.
If you want us to carry out the calculation to find out what your ideal heat pump would be, do not hesitate to contact us here.
protection cover | digital control panel | control pressure gauge |
They are significantly quieter equipment than standard heat pumps, so they give the possibility of being installed in places closer to the rooms of the house or rest.
Its exchanger is made of titanium with a high-resistance casing, which makes it very resistant to the action of chemical products, and therefore extends its useful life for a long time.
Its ability to extract heat from the air is effective from an ambient temperature of 7ºC, and it is also equipped with an automatic defrosting system.
CHARACTERISTICS TABLE OF THE HPGI HEAT PUMP RANGE
Model | HPGI50 | HPGI60 | HPGI70 | HPGI85 | |
Air capacity 28ºC / water 28ºC, air humidity 80% | |||||
heating power | kW | 10-2.3 | 12-2.9 | 15-3.2 | 17-3.8 |
power consumption | kW | 1.55-0.14 | 1.77-0.18 | 2.26-0.2 | 2.67-0.23 |
COP | 16-6.5 | 16-6.8 | 16-6.6 | 16-6.4 | |
Air capacity 15ºC / water 26ºC, air humidity 70% | |||||
heating power | kW | 7-1.9 | 8.5-2 | 10-2.2 | 12-3 |
power consumption | kW | 1.43-0.27 | 1.72-0.28 | 2.07-0.31 | 2.43-0.42 |
COP | 7.1-4.9 | 7.2-4.9 | 7.2-4.8 | 7.2-4.9 | |
Characteristic | |||||
compressor type | inverter | ||||
Electrical power supply | v | 220~240V / 50Hz / mono | |||
rated current | A | 69 | 79 | 10 | 118 |
minimum fuse | A | 10 | 12 | 14 | 16 |
Maximum pool volume | m³ | fifty | 60 | 80 | 95 |
Recommended water flow | m³/h | 2.8 | 3.7 | 4.0 | 4.6 |
Working temperature range | °C | 7 to 43 | |||
water pressure drop | KPa | 12 | 14 | fifteen | fifteen |
Exchanger type | Twist-Titanium tube in PVC | ||||
hydraulic connections | hmm | fifty | |||
Fan | Horizontal | ||||
Degree of protection | IPX4 | ||||
Maximum suction and discharge side | MPa | 4.2 | |||
Noise level at 10 meters | dB(A) | 22-34 | 23-35 | 23-37 | 24-37 |
Noise level at 1 meter | dB(A) | 40-52 | 40-52 | 40-54 | 41-54 |
Refrigerant gas type | R32 | ||||
amount of refrigerant | g | 720 | 550 | 750 | 850 |
CO2 equivalent | tm | 0.49 | 0.37 | 0.51 | 0.57 |
Net weight | kg | 56 | 68 | 73 | 78 |
Gross weight | kg | 68 | 73 | 78 | 83 |
Dimensions | cm | 86x39x59 | 99*40*69 | ||
packing dimensions | cm | 89x42x63 | 102x44x71 |