{"title":"Cyclonic filters","description":"\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eWhat is a cyclone filter for pools, and what is it used for?\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003ecyclone filter or cyclone prefilter\u003c\/strong\u003e is installed before the main filter to separate some of the solid particles present in the water through a centrifugal separation system.\u003c\/p\u003e\n\u003cp\u003eIts function is to reduce the amount of dirt that subsequently reaches the sand, glass, or other filtration system.\u003c\/p\u003e\n\u003cp\u003eIt does not replace the pool’s main filter: it works as a \u003cstrong\u003eprefilter\u003c\/strong\u003e, complementing the existing filtration system.\u003c\/p\u003e\n\u003ch3\u003eIs it worth installing a cyclone prefilter?\u003c\/h3\u003e\n\u003cp\u003eIt can be especially useful when the filter receives a large amount of dirt and requires frequent backwashing.\u003c\/p\u003e\n\u003cp\u003eBy initially retaining some of the particles, a cyclone prefilter can \u003cstrong\u003ereduce the amount of dirt reaching the main filter\u003c\/strong\u003e. Depending on the equipment and pool conditions, this may help extend the intervals between certain maintenance operations.\u003c\/p\u003e\n\u003cp\u003eTo assess whether it is worthwhile for your installation, compare the flow rate, current backwashing frequency, water consumption, and characteristics of the model you want to install.\u003c\/p\u003e\n\u003ch3\u003eDoes a cyclone filter replace the sand filter?\u003c\/h3\u003e\n\u003cp\u003eNo. A cyclone filter for pools normally functions as a \u003cstrong\u003eprefilter\u003c\/strong\u003e, while the sand filter performs the main water filtration.\u003c\/p\u003e\n\u003cp\u003eThe water first passes through the cyclone system, where some of the dirt is separated, and then continues to the filtration system.\u003c\/p\u003e\n\u003cp\u003eTherefore, both pieces of equipment perform different functions and can work together in a properly sized installation.\u003c\/p\u003e\n\u003ch3\u003eWhere is a cyclone prefilter installed?\u003c\/h3\u003e\n\u003cp\u003eIt is normally integrated into the hydraulic circuit \u003cstrong\u003ebefore the main filter\u003c\/strong\u003e, following the layout and flow direction specified by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eThe exact location will depend on the model, pump, available connections, and installation configuration.\u003c\/p\u003e\n\u003cp\u003eBefore buying it, also check its physical dimensions to ensure you have enough space in the equipment enclosure or technical area.\u003c\/p\u003e\n\u003ch3\u003eIs a cyclone filter compatible with any pool?\u003c\/h3\u003e\n\u003cp\u003eIt should not be considered universal. Compatibility depends mainly on the model’s \u003cstrong\u003eoperating flow rate, maximum pressure, connection diameter, and hydraulic characteristics\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eYou should also check that there is enough space to install it and subsequently carry out purging and maintenance operations.\u003c\/p\u003e\n\u003cp\u003eIf you already have a pump and filter installed, compare their specifications with the operating range specified for the cyclonic prefilter.\u003c\/p\u003e\n\u003ch3\u003eHow do you choose the size of a cyclonic filter?\u003c\/h3\u003e\n\u003cp\u003eThe main criterion should not be the pool volume alone. In particular, you should check the \u003cstrong\u003eflow-rate range accepted by the prefilter\u003c\/strong\u003e and relate it to the installation’s actual flow rate.\u003c\/p\u003e\n\u003cp\u003eA model that is too small or operating outside its intended range may not perform as expected.\u003c\/p\u003e\n\u003cp\u003eAlso check the maximum pressure, connections, and dimensions before selecting a product reference.\u003c\/p\u003e\n\u003ch3\u003eDoes a cyclonic prefilter help save water?\u003c\/h3\u003e\n\u003cp\u003eIt may help reduce the water used for maintenance \u003cstrong\u003eif it allows the backwashing of the main filter to be spaced out\u003c\/strong\u003e, but the actual savings depend on each installation.\u003c\/p\u003e\n\u003cp\u003eFactors include the amount of dirt entering the pool, washing frequency, filter size, and the performance of the cyclonic prefilter itself.\u003c\/p\u003e\n\u003cp\u003eIf a manufacturer provides specific savings data for a particular model, use those figures to compare equipment rather than applying a universal percentage or amount.\u003c\/p\u003e\n\u003ch3\u003eDo cyclonic filters need sand, glass, or cartridges?\u003c\/h3\u003e\n\u003cp\u003eConventional cyclonic systems separate particles through the centrifugal movement of the water, so they \u003cstrong\u003edo not use sand, glass, or cartridges as the main filter media\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe separated dirt accumulates in the area provided for it by the equipment’s design and must be removed using the corresponding purge system.\u003c\/p\u003e\n\u003cp\u003eThis does not eliminate the need for the main pool filter’s filter media.\u003c\/p\u003e\n\u003ch3\u003eHow is a cyclonic filter cleaned?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the model, but these units usually have a system that allows \u003cstrong\u003ethe accumulated dirt to be purged\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe frequency will depend on the amount of retained particles and how the pool is used. On models with a transparent chamber, it may be easier to visually check sediment accumulation.\u003c\/p\u003e\n\u003cp\u003eAlways follow the manufacturer's specified purging procedure and comply with its instructions regarding valves and pump operation.\u003c\/p\u003e\n\u003ch3\u003eHow long will it take for my cyclone filter to arrive, and how much does shipping cost?\u003c\/h3\u003e\n\u003cp\u003eThe lead time depends on the \u003cstrong\u003eproduct reference, availability, and order destination\u003c\/strong\u003e. Check the information shown on the product page before completing your purchase.\u003c\/p\u003e\n\u003cp\u003eOrders over \u003cstrong\u003e€100 include free shipping to mainland Spain\u003c\/strong\u003e, except for products subject to special transport conditions.\u003c\/p\u003e\n\u003cp\u003eIf you need to install it urgently, check especially the availability and estimated lead time for the selected model.\u003c\/p\u003e\n\u003ch3\u003eWhat warranty do cyclone filters have?\u003c\/h3\u003e\n\u003cp\u003eThe warranty depends on the manufacturer and model, in addition to the rights applicable under the relevant regulations.\u003c\/p\u003e\n\u003cp\u003eIt is important to distinguish a \u003cstrong\u003emanufacturing defect\u003c\/strong\u003e from problems resulting from incorrect installation, use outside the specified pressure or flow-rate ranges, or inadequate maintenance.\u003c\/p\u003e\n\u003cp\u003eKeep the invoice and follow the manufacturer's installation and operating instructions.\u003c\/p\u003e\n\u003ch3\u003eCan I return a cyclone filter if it is not compatible with my installation?\u003c\/h3\u003e\n\u003cp\u003eFor online purchases, you have the applicable withdrawal rights in accordance with the regulations and the relevant terms of sale.\u003c\/p\u003e\n\u003cp\u003eThe general withdrawal period for distance purchases in Spain and the EU is \u003cstrong\u003e14 calendar days\u003c\/strong\u003e, although the applicable conditions and possible exceptions must be taken into account.\u003c\/p\u003e\n\u003cp\u003eBefore installing or using the equipment, check the \u003cstrong\u003eflow rate, connections, pressure, and dimensions\u003c\/strong\u003e. If you have any questions about the reference you received, review the return conditions before installation.\u003c\/p\u003e\n\u003ch3\u003eHow can I find out whether a cyclone filter is available?\u003c\/h3\u003e\n\u003cp\u003eCheck the \u003cstrong\u003eavailability status shown on the product page\u003c\/strong\u003e when placing your order.\u003c\/p\u003e\n\u003cp\u003eAvailability may vary between product references, and not all models necessarily have the same dispatch time.\u003c\/p\u003e\n\u003cp\u003eIf you need the equipment urgently, use the information corresponding to the specific model before completing your purchase.\u003c\/p\u003e","products":[{"product_id":"1193-prefiltro-centrifugo-multicyclone-12-waterco","title":"Waterco MultiCyclone 12 centrifugal prefilter – 200372","description":"\u003cstyle\u003e\n#jc-multicyclone{\n  max-width:1600px;\n  margin:0 auto 2.5rem;\n  padding:0 16px;\n  color:#1f2937;\n}\n\n#jc-multicyclone *{\n  box-sizing:border-box;\n}\n\n#jc-multicyclone p{\n  margin:.55rem 0;\n  line-height:1.62;\n}\n\n#jc-multicyclone ul{\n  margin:.45rem 0;\n  padding-left:20px;\n  line-height:1.55;\n}\n\n#jc-multicyclone li{\n  margin:.22rem 0;\n}\n\n#jc-multicyclone .jc-h2{\n  margin:24px 0 12px;\n  font-size:24px!important;\n  line-height:1.25;\n  font-weight:700;\n  color:#123a63;\n}\n\n#jc-multicyclone .jc-h3{\n  margin:0 0 9px;\n  font-size:19px!important;\n  line-height:1.3;\n  font-weight:700;\n  color:#123a63;\n}\n\n#jc-multicyclone .jc-qbox{\n  margin:0 0 17px;\n  padding:14px 16px;\n  background:#eef6ff;\n  border-left:4px solid #2b6cb0;\n  border-radius:8px;\n}\n\n#jc-multicyclone .jc-grid{\n  display:grid;\n  grid-template-columns:repeat(2,minmax(0,1fr));\n  gap:16px;\n  margin:16px 0;\n}\n\n#jc-multicyclone .jc-card{\n  padding:16px;\n  background:#f6f9fc;\n  border:1px solid #dbe7f3;\n  border-radius:10px;\n}\n\n#jc-multicyclone .jc-highlights{\n  display:grid;\n  grid-template-columns:repeat(4,minmax(0,1fr));\n  gap:12px;\n  margin:16px 0;\n}\n\n#jc-multicyclone .jc-highlight{\n  padding:14px 10px;\n  background:#fff;\n  border:1px solid #dbe7f3;\n  border-radius:9px;\n  text-align:center;\n}\n\n#jc-multicyclone .jc-highlight strong{\n  display:block;\n  margin-bottom:4px;\n  font-size:18px;\n  color:#123a63;\n}\n\n#jc-multicyclone .jc-img-card{\n  padding:16px;\n  background:#f6f9fc;\n  border:1px solid #dbe7f3;\n  border-radius:10px;\n  text-align:center;\n}\n\n#jc-multicyclone .jc-img-card--single{\n  max-width:760px;\n  margin:16px auto;\n}\n\n#jc-multicyclone .jc-img-card img{\n  display:block;\n  width:auto;\n  max-width:100%;\n  max-height:420px;\n  height:auto;\n  object-fit:contain;\n  margin:8px auto 12px;\n}\n\n#jc-multicyclone .jc-img-card p{\n  max-width:650px;\n  margin:10px auto 0;\n  text-align:left;\n}\n\n#jc-multicyclone .jc-table-wrap{\n  width:100%;\n  overflow-x:auto;\n  -webkit-overflow-scrolling:touch;\n  margin:12px 0 16px;\n}\n\n#jc-multicyclone table{\n  width:100%;\n  min-width:680px;\n  border-collapse:collapse;\n}\n\n#jc-multicyclone th,\n#jc-multicyclone td{\n  padding:10px 12px;\n  border:1px solid #cce4f5;\n  text-align:left;\n  vertical-align:middle;\n}\n\n#jc-multicyclone th{\n  background:#b3d7f0;\n  color:#123a63;\n  font-weight:700;\n}\n\n#jc-multicyclone tbody tr:nth-child(even) td{\n  background:#eaf4fb;\n}\n\n#jc-multicyclone tbody tr.jc-current td{\n  background:#dceeff!important;\n  font-weight:700;\n  border-top:2px solid #2b6cb0;\n  border-bottom:2px solid #2b6cb0;\n}\n\n#jc-multicyclone .jc-alert{\n  margin:16px 0;\n  padding:13px 16px;\n  background:#fff8e8;\n  border-left:4px solid #d89b20;\n  border-radius:8px;\n}\n\n#jc-multicyclone .jc-faq details{\n  margin-bottom:8px;\n  padding:10px 13px;\n  background:#fff;\n  border:1px solid #dbe7f3;\n  border-radius:8px;\n}\n\n#jc-multicyclone .jc-faq summary{\n  cursor:pointer;\n  font-weight:700;\n  color:#123a63;\n}\n\n#jc-multicyclone .jc-banner{\n  margin-top:18px;\n  text-align:center;\n}\n\n#jc-multicyclone .jc-banner img{\n  display:block;\n  width:100%;\n  height:auto;\n  margin:0 auto;\n}\n\n@media(max-width:900px){\n\n  #jc-multicyclone .jc-highlights{\n    grid-template-columns:repeat(2,minmax(0,1fr));\n  }\n\n}\n\n@media(max-width:760px){\n\n  #jc-multicyclone{\n    padding:0 10px;\n  }\n\n  #jc-multicyclone .jc-grid{\n    grid-template-columns:1fr;\n  }\n\n  #jc-multicyclone .jc-img-card img{\n    max-height:330px;\n  }\n\n  #jc-multicyclone .jc-table-wrap:after{\n    content:\"← Desliza horizontalmente para comparar los modelos →\";\n    display:block;\n    padding-top:7px;\n    font-size:12px;\n    color:#64748b;\n    text-align:center;\n  }\n\n}\n\u003c\/style\u003e\n\u003cdiv id=\"jc-multicyclone\"\u003e\n\u003c!-- ANTES DE COMPRAR --\u003e\n\u003cdiv class=\"jc-qbox\"\u003e\n\u003cstrong\u003eBefore buying:\u003c\/strong\u003e\nthe \u003cstrong\u003eWaterco MultiCyclone 12\u003c\/strong\u003e is a centrifugal prefilter\nwhich is installed before the main filter. This version incorporates\n\u003cstrong\u003e12 hydrocyclones\u003c\/strong\u003e and operates at a flow rate of\n\u003cstrong\u003e2.4 to 18 m³\/h\u003c\/strong\u003e. Check the flow rate and connections\nof your installation before placing the order.\n\u003c\/div\u003e\n\u003c!-- BLOQUE PRINCIPAL --\u003e\n\u003cdiv class=\"jc-grid\"\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eReduces the dirt reaching the filter\u003c\/h2\u003e\n\u003cp\u003e\nThe \u003cstrong\u003eWaterco MultiCyclone 12\u003c\/strong\u003e uses centrifugal force\nto separate heavier dirt particles from the water before\nbefore they reach the pool's main filter.\n\u003c\/p\u003e\n\u003cp\u003e\nThe water is distributed among its \u003cstrong\u003e12 hydrocyclones\u003c\/strong\u003e,\nwhere the centrifugal motion moves the sediment towards the\nwalls and makes them descend into the lower transparent chamber.\n\u003c\/p\u003e\n\u003cp\u003e\nWaterco states that the system can reduce\n\u003cstrong\u003eby up to 80% the dirt load reaching the filter\u003c\/strong\u003e,\nhelping to reduce maintenance and cleaning frequency.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Waterco\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MultiCyclone 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e 200372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrocyclones:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow rate:\u003c\/strong\u003e 2.4–18 m³\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 3.5 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e 40 mm \/ 1½\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurge valve:\u003c\/strong\u003e 25 mm \/ 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSediment chamber:\u003c\/strong\u003e transparent polycarbonate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- DATOS DESTACADOS --\u003e\n\u003cdiv class=\"jc-highlights\"\u003e\n\u003cdiv class=\"jc-highlight\"\u003e\n\u003cstrong\u003e12\u003c\/strong\u003e\nHydrocyclones\n\u003c\/div\u003e\n\u003cdiv class=\"jc-highlight\"\u003e\n\u003cstrong\u003e2.4–18 m³\/h\u003c\/strong\u003e\nFlow range\n\u003c\/div\u003e\n\u003cdiv class=\"jc-highlight\"\u003e\n\u003cstrong\u003e3.5 bar\u003c\/strong\u003e\nMaximum pressure\n\u003c\/div\u003e\n\u003cdiv class=\"jc-highlight\"\u003e\n\u003cstrong\u003eNo filter media\u003c\/strong\u003e\nLow maintenance\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- FUNCIONAMIENTO --\u003e\n\u003ch2 class=\"jc-h2\"\u003eOperation and maintenance\u003c\/h2\u003e\n\u003cdiv class=\"jc-grid\"\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eCentrifugal force separation\u003c\/h2\u003e\n\u003cp\u003e\nThe water enters the hydrocyclones tangentially, generating\na strong centrifugal motion. The heavier particles\nare moved outwards and descend into the\n\u003cstrong\u003esediment chamber\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003cp\u003e\nThe system operates without cartridges or other filter media\nthat needs to be cleaned or replaced.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eQuick purge\u003c\/h2\u003e\n\u003cp\u003e\nThe transparent chamber allows you to visually check the amount\nof accumulated dirt. To remove it, simply open the\n\u003cstrong\u003elower purge valve\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003cp\u003e\nWaterco states an approximate consumption of\n\u003cstrong\u003e15 litres of water per purge\u003c\/strong\u003e, reducing the need\nof carrying out frequent backwashing of the main filter.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- IMAGEN INTERIOR --\u003e\n\u003cdiv class=\"jc-img-card jc-img-card--single\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eInside the MultiCyclone 12\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/Prefiltro-centrifugo-multicyclone-Waterco-200374-seccion-BR-w.png?v=1741939316\" alt=\"Inside the Waterco MultiCyclone 12 prefilter with 12 hydrocyclones\" loading=\"lazy\"\u003e\n\u003cp\u003e\nThe MultiCyclone 12 distributes the water among\n\u003cstrong\u003e12 hydrocyclones\u003c\/strong\u003e, where centrifugal force\nseparates heavier particles before they reach the main filter.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- INSTALACIÓN --\u003e\n\u003ch2 class=\"jc-h2\"\u003eInstallation and dimensions\u003c\/h2\u003e\n\u003cdiv class=\"jc-grid\"\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eWhere it is installed\u003c\/h2\u003e\n\u003cp\u003e\nThe MultiCyclone is normally installed\n\u003cstrong\u003ebetween the pump and the main filter\u003c\/strong\u003e, acting as\na first stage of dirt separation.\n\u003c\/p\u003e\n\u003cp\u003e\nIt can be used with sand or cartridge filters and adapted to\nfor both new and existing installations, provided that\nmeet the unit's flow rate and connection requirements.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"jc-card\"\u003e\n\u003ch2 class=\"jc-h3\"\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 563 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront width:\u003c\/strong\u003e 260 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 271 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\nCheck the available space in the plant room before\ninstallation, especially the height required for the unit\nand access to the purge valve.\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- COMPARATIVA --\u003e\n\u003ch2 class=\"jc-h2\"\u003eWaterco MultiCyclone range comparison\u003c\/h2\u003e\n\u003cdiv class=\"jc-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003eMaximum pressure\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"jc-current\"\u003e\n\u003ctd\u003e200372\u003c\/td\u003e\n\u003ctd\u003eMultiCyclone 12 · Current model\u003c\/td\u003e\n\u003ctd\u003e40 mm \/ 1½\"\u003c\/td\u003e\n\u003ctd\u003e2.4–18 m³\/h\u003c\/td\u003e\n\u003ctd\u003e3.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200375\u003c\/td\u003e\n\u003ctd\u003eMultiCyclone 16\u003c\/td\u003e\n\u003ctd\u003e63 mm\u003c\/td\u003e\n\u003ctd\u003e3.3–30 m³\/h\u003c\/td\u003e\n\u003ctd\u003e3.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c!-- AVISO COMERCIAL --\u003e\n\u003cdiv class=\"jc-alert\"\u003e\n\u003cstrong\u003eLess maintenance and water consumption:\u003c\/strong\u003e\nby reducing the amount of dirt that reaches the main filter,\nthe MultiCyclone helps reduce cleaning frequency or\nbackwashing. Waterco indicates that, in certain installations,\nwith a sand filter, savings can reach up to\n\u003cstrong\u003e7,000 litres of water per year\u003c\/strong\u003e.\n\u003c\/div\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv class=\"jc-faq\"\u003e\n\u003ch2 class=\"jc-h2\"\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes the MultiCyclone 12 replace the pool filter?\u003c\/summary\u003e\n\u003cp\u003e\nNo. It is a \u003cstrong\u003ecentrifugal pre-filter\u003c\/strong\u003e installed upstream\nof the main filter to reduce the amount of dirt that reaches it.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDoes it require cartridges or filter media?\u003c\/summary\u003e\n\u003cp\u003e\nNo. The MultiCyclone uses centrifugal force and\n\u003cstrong\u003edoes not contain filter media that needs to be cleaned\nor replace it periodically\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do you clean the MultiCyclone?\u003c\/summary\u003e\n\u003cp\u003e\nDirt accumulates in the lower transparent chamber.\nTo remove it, open the purge valve; there is no need\nto dismantle the unit.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between MultiCyclone 12 and MultiCyclone 16?\u003c\/summary\u003e\n\u003cp\u003e\nThe \u003cstrong\u003eMultiCyclone 12\u003c\/strong\u003e features 12 hydrocyclones\nand operates at up to \u003cstrong\u003e18 m³\/h\u003c\/strong\u003e. The\n\u003cstrong\u003eMultiCyclone 16\u003c\/strong\u003e has 16 hydrocyclones\nand supports a flow rate of up to \u003cstrong\u003e30 m³\/h\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c!-- BANNER --\u003e\n\u003cdiv class=\"jc-banner\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/Banner-descripcion-Multicyclone-1350x337-w.png?v=1741939316\" alt=\"Waterco MultiCyclone centrifugal pre-filter for swimming pools\" loading=\"lazy\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Waterco","offers":[{"title":"Default Title","offer_id":51320892424519,"sku":"200374","price":356.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/11480.jpg?v=1742970307"},{"product_id":"2181-prefiltro-hydrospin-astralpool","title":"Astralpool Hydrospin Prefilter","description":"\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eSave 50% of the water used to wash your filter. HydroSpin is a hydrocyclonic pre-filter that can be installed in both new and existing filtration systems. It can handle flow rates of up to 30 m³\/h at a maximum working pressure of 2.5 bar. It is installed between the pump and the filter, separating solids down to 40 microns and thereby halving the filtration system's backwash water consumption. The HydroSpin has a solids collection tank with three separate zones (sedimentation, clarification, and thickening). It can be cleaned using just 5 liters of water without stopping the pump. · Significant reduction in filter-washing operations. · Low head loss, allowing installation without replacing the existing pump. · It can be installed on the floor using the supplied accessories or on the wall using DN300 flanges.\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2445a2; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eFeatures\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eDesigned to operate in any new or existing aquatic installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eThe HydroSpin is recommended for installation in filtration systems with flow rates of 5 to 30 m³\/h and a maximum pressure of 2.5 bar.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eSignificantly reduces the amount of water discharged into the drain when washing the filters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eReduces the frequency of washing the filtration system.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2445a2; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eInstallation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eThe HydroSpin pre-filter must be installed between the pump and the filter. Make sure there is a drain in the area where the HydroSpin is installed. Install it on a horizontal surface and ensure that there is sufficient space around the HydroSpin for the inspections and maintenance required throughout its service life. It can be installed in either of two ways: on the wall or with three supports.\u003c\/span\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eWall installation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eYou must first purchase the 2-flange kit for DN250 pipe.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eInstall the flanges on the wall in their final position, with a distance of 95 mm between them.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003ePosition the HydroSpin using the corresponding support.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eBolt the flanges in place.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eGlue fittings or 3-piece fittings for Ø63 pipe to the HydroSpin inlet and outlet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eIt is recommended to install valves at both the inlet and outlet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eScrew the purge valve into the bottom of the HydroSpin, applying Teflon tape to the thread. Check that it is fully closed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eConnect a pipe to the HydroSpin purge outlet and route it to the drain.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eIt is recommended to install a pressure gauge at the HydroSpin inlet.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px; float: none;\"\u003eStart the pump.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003ctable style=\"width: 1000px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width: 500px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/pre-hydrospin-inst.jpg?v=1741939316\" alt=\"\" width=\"224\" height=\"180\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/pre-hyrospin-inst-3.jpg?v=1741939316\" alt=\"\" width=\"223\" height=\"180\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003eInstallation with the three supports.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePress-fit the three supports into the support ring (Fig. 2)\u003c\/li\u003e\n\u003cli\u003ePosition the HydroSpin in the support ring at its final location.\u003c\/li\u003e\n\u003cli\u003eContinue at point 5 of the previous section.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eDimension\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ctable style=\"width: 1000px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width: 500px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/dimension-pref-hydrospin.jpg?v=1741939316\" alt=\"\" width=\"137\" height=\"300\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/dimension-pref-hydrospin-2.jpg?v=1741939316\" alt=\"\" width=\"170\" height=\"200\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AstralPool","offers":[{"title":"Default Title","offer_id":51320929288519,"sku":"45289","price":493.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/2384.jpg?v=1742971173"},{"product_id":"4258-prefiltro-hidrociclonico-hydrospin-compact-de-astralpool","title":"AstralPool Hydrospin Compact hydrocyclonic prefilter","description":"\u003cp style=\"text-align: justify;\"\u003eThe new AstralPool Hydrospin Compact hydrocyclonic prefilter is designed to save water when washing filters, thereby extending the maintenance interval for the filters (filter media washing) and saving up to 50% of the water used to wash the filter.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe Hydrospin Compact prefilter can separate solids down to 60 microns thanks to its multiple built-in hydrocyclones, thereby halving the water consumption during filtration system washing.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe solids separated at the bottom are expelled by opening the purge valve. Open it before the dirt exceeds the indicated limit.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eYou will not need to stop the pump to clean the filter.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eYou will have no problems installing the prefilter in a new or existing system.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eWe recommend installing the Hydrospin Compact prefilter in a filtration system with a flow rate of 3 to 16.5 m³\/h and a maximum pressure of 2.5 bar.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThe new AstralPool Hydrospin Compact prefilter offers several advantages over other prefilters.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eAdvantages.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eWe will significantly reduce the amount of water discharged into the drain during filter washing.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eWe will reduce the frequency of washing the filtration system.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eSpecifications.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul style=\"text-align: justify;\"\u003e\n\u003cli\u003eWorking pressure: 2.5 bar.\u003c\/li\u003e\n\u003cli\u003eØ 50 connections (2 - ¼\" thread).\u003c\/li\u003e\n\u003cli\u003ePurge connection: ¾\".\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate (m³\/h): 16.5.\u003c\/li\u003e\n\u003cli\u003eMinimum flow rate (m³\/h): 3.\u003c\/li\u003e\n\u003cli\u003eWater required for cleaning: 5 liters.\u003c\/li\u003e\n\u003cli\u003eFloor-mounting support included.\u003c\/li\u003e\n\u003cli\u003eWall-mounting support included.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eWhen installing the AstralPool Hydrospin Compact prefilter, install it between the pump and the filter.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eFirst, make sure that there is a drain in the room where the HydroSpin is located, and ensure that the surface on which the prefilter is installed is level.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003eThere must be enough space around the Prefilter to carry out the necessary inspections and maintenance throughout its service life.\u003c\/p\u003e\u003cp style=\"text-align: justify;\"\u003e\u003c\/p\u003e\u003cul style=\"text-align: justify;\"\u003e\u003cli\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003eWall installation.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli style=\"text-align: justify;\"\u003eFirst, mark the three holes on the support wall.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eDrill the three Ø 8 mm holes.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eScrew the support to the wall.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eAttach the Hydrospin Compact Prefilter to the wall support.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eGlue the connectors or three-piece fittings for Ø 50 pipe at both the inlet and outlet of the Hydrospin prefilter.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eWe recommend installing valves at both the inlet and outlet of the prefilter.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eThread the purge valve onto the bottom of the Hydrospin Prefilter. Apply Teflon tape to the thread, then check that it is properly closed.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eConnect a pipe from the purge outlet of the Hydrospin Prefilter to the drain.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eWe recommend installing a pressure gauge at the inlet of the Hydrospin Prefilter.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eStart the pump.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ctable style=\"width: 1000px;\"\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003ctd style=\"width: 500px; text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/filtro-hydrosping-1.jpg?v=1741939316\" alt=\"\" height=\"160\" width=\"177\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 500px; text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/filtro-hydrosping-2.jpg?v=1741939316\" alt=\"filtro_hydrosping_2.jpg\" height=\"160\" width=\"190\"\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cul\u003e\u003cli style=\"text-align: justify;\"\u003e\u003cspan style=\"color: #2c9ffd;\"\u003e\u003cstrong\u003eFloor installation.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli style=\"text-align: justify;\"\u003eMark the three holes on the support floor.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eDrill the three Ø 8 mm holes.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eContinue from point 3 of the previous device.\u003c\/li\u003e\n\u003cli style=\"text-align: justify;\"\u003eAt the purge outlet, you can connect a solenoid valve to schedule filter cleanings.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/filtro-hydrosping-3.jpg?v=1741939316\" alt=\"\" height=\"157\" width=\"120\"\u003e\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e","brand":"AstralPool","offers":[{"title":"Default Title","offer_id":51321168003399,"sku":"53743","price":294.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/4949.jpg?v=1742974072"},{"product_id":"10923-prefiltro-centrifugo-multicyclone-16-waterco","title":"Waterco Multicyclone 16 centrifugal prefilter","description":"\u003ctable style=\"width: 100%;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%;\"\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/Multicyclone-Logo3.png?v=1741939316\" alt=\"\" width=\"500\" height=\"133\" style=\"text-align: center;\"\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cp\u003e\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 50%;\"\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe Multicyclone 16 centrifugal prefilter is a prefiltration device that can save water and reduce maintenance for any pool filter. It contains no filtration elements to clean or replace.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eIt uses centrifugal force to separate dirt particles from the water. The water is directed by a diversion guide to a set of hydrocyclones, where it enters tangentially to produce a centrifugal effect. This causes the sediment to move to the outer wall of the hydrocyclone, where it descends into a sediment chamber, while the clean water rises back up toward the outlet.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cbr\u003eIt is installed between the pool pump and the filtration system (sand filter, cartridges, etc.). The required minimum and maximum flow rates are between 3 m³\/h and 30 m³\/h.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cbr\u003eThe Multicyclone 16 centrifugal prefilter can retain up to 70% of particles between 50 and 80 microns, and 100% of larger particles.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eAs it is a robust system with no parts requiring movement, maintenance is virtually unnecessary. Filtration is carried out by the centrifugal action of the water.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cbr\u003eThis product is ideal for extending the service life of your pool filter.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cbr\u003eInstalling the Multicyclone 16 centrifugal prefilter is very easy, and it is perfectly suitable for most swimming pool filtration systems.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/Multicyclone-16-esquema--BR.png?v=1741939316\" width=\"319\" height=\"500\" alt=\"Multicyclone-16-esquema--BR.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eView with the 16 internal hydrocyclones.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #2445a2;\"\u003eAdvantages:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt has no filtration element to clean or replace.\u003c\/li\u003e\n\u003cli\u003eThere are no moving parts.\u003c\/li\u003e\n\u003cli\u003eReduces the need for filter maintenance.\u003c\/li\u003e\n\u003cli\u003eThe product comes with a 2-year warranty.\u003c\/li\u003e\n\u003cli\u003eSupplied with quick-connect fittings and a purge valve.\u003c\/li\u003e\n\u003cli\u003eSuitable for swimming pools, water treatment companies, and the aquaculture industry.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ctable style=\"width: 100%;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/Banner-descripcion-Multicyclone-1350x337-w.png?v=1741939316\" width=\"1500\" height=\"374\" alt=\"Banner-descripcion-Multicyclone-1350x337-w.png\"\u003e\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e","brand":"Waterco","offers":[{"title":"Default Title","offer_id":51321554534727,"sku":"200375","price":450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/files\/11481.jpg?v=1742977884"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0875\/1307\/1943\/collections\/811.jpg?v=1739449424","url":"https:\/\/www.piscinasyproductos.com\/en-eu\/collections\/filtros-ciclonicos-piscinas.oembed","provider":"Piscinas y Productos","version":"1.0","type":"link"}